2024 FIG (Filing Instructions Guide)
1. What's in the FIG?
The 2024 Filing Instructions Guide (FIG) is a compendium of resources to help you file annual HMDA data collected in 2024 with the Consumer Financial Protection Bureau (Bureau) in 2025. These resources are briefly described in this section and are further detailed throughout this document in individual sections.
The HMDA agencies have agreed that filing HMDA data collected in or after 2017 with the Bureau will be deemed as a submission to the appropriate Federal agency. 1
The FIG includes the following sections:
1.1 Changes to the Submission Process for Data Collected in 2024
This section provides a summary of the changes made to the submission process for filing HMDA data collected in 2024 with the Bureau.
This section may be useful for employees in a variety of roles, for example, your institution’s:
- Compliance Officer
- Staff who collect, prepare, and submit HMDA data
- HMDA technology support staff
1.2 2024 File Specifications
This section provides information including valid values, how to format your loan/application register, and how to file your HMDA data collected in 2023 with the Bureau.
This section may be useful for employees in a variety of roles, for example, your institution’s:
- Staff who collect, prepare, and submit HMDA data
- HMDA technology support staff
1.3 2024 Data Specifications
On October 15, 2015, the Bureau issued a final rule (2015 HMDA Final Rule) Regulation C. In August 2017, the Bureau issued a final rule amending the 2015 HMDA Rule primarily to make technical corrections and clarify amendments (2017 HMDA Final Rule). In August 2018, the Bureau issued an interpretive and procedural rule (2018 HMDA Rule) to implement and clarify the amendments to HMDA made by section 104(a) of the Economic Growth, Regulatory Relief, and Consumer Protection Act (the Act). Beginning with data collected in 2018, HMDA filers should report the data points described in the 2015 HMDA Final Rule and the 2017 HMDA Final Rule, as modified by the 2018 HMDA Rule for insured depository institutions and insured credit unions reporting transactions covered by a partial exemption.
This section provides instructions for what to enter into each data field in the loan/application register.
This section may be useful for employees in a variety of roles, for example, your institution’s:
- Compliance officer
- Staff who collect, prepare, and submit HMDA data
1.4 2024 Edit Specifications
This section lists the edits that financial institutions must run on HMDA data before filing with the Bureau.
This section may be useful for employees in a variety of roles, for example, your institution’s:
- Staff who collect, prepare, and submit HMDA data
2. Changes to the Submission Process for Data Collected in 2024
Version Log | |||
---|---|---|---|
Date | Version | Section | Changes |
November 2023 | 1.2 | 1. Section 5.3, Table 6
| |
October 2023 | 1.1 | 1. Section 1 and 1.2
| |
August 2023 | 1.0 | Original Document. Changes from 2023 FIG: 1. Section 3.4, Table 1 and Section 4.2.1
|
- Consult the version log of prior years' versions of the FIG for previous changes.
2.1 Items that have changed:
There are no significant changes to the submission process for data collected in 2024 and reported in 2025.
2.2 Items that have not changed:
The data fields to be collected and reported have not changed:
The required data fields for the 2024 data have not changed from the 2023 data collection and reporting requirements. Please refer to Regulation C, the 2018 HMDA Rule, and the Data Specification section for the 2024 requirements.
The loan/application register file format for submitting your HMDA data:
Financial institutions will submit data collected in a pipe delimited text file (.txt). Data fields will be separated by a pipe character, “|”, and will not be fixed length. Do not include leading zeros for the purpose of making a data field a specific number of characters. Additional information regarding the loan/application register file format can be found in the “Self Service Knowledge Portal” located at https://ffiec.cfpb.gov. For additional questions, contact hmdahelp@cfpb.gov.
Text entries in alphanumeric fields do not need to use all uppercase letters with the exception of:
- “NA” used when the reporting requirement is not applicable;
- Two-letter state codes;
- A capital “E” at the beginning of any “Exempt” response.
A loan/application register formatting tool will be provided to help filers format certain data into a pipe delimited text file. This tool may be especially helpful for filers with small volumes of reported loans that do not use vendor or other software to prepare their HMDA data for submission. Information regarding the loan/application register formatting tool will be located at https://ffiec.cfpb.gov.
The way you submit your HMDA data:
Filers will submit their HMDA data using a web interface referred to as the HMDA Platform. Information regarding the HMDA Platform can be located at: https://ffiec.cfpb.gov.
We recommend that HMDA filers use a modern browser, such as the latest version of Google Chrome™, Mozilla® Firefox®, Microsoft Edge™, or other modern browsers.
The following submission methods will not be permitted:
- PC Diskette and CD-ROM
- Submission via Web (from the Data Entry Software (DES))
- E-mail to HMDASUB@FRB.GOV
- Paper Submissions
The process by which you validate the edit report:
Financial institutions must address all edits prior to submitting their HMDA data. In contrast to the previous process for filing data with the Federal Reserve Board (FRB), all edits must now be addressed prior to filing HMDA data with the Bureau in order to complete the submission process.
The edit report will be web-based:
- Edit reports will not be e-mailed to filers in PDF format. Instead, the Bureau edit reports will be viewed and can be downloaded from the HMDA Platform.
- Responses to the edits will not be faxed or e-mailed to the Bureau. The HMDA Platform will guide filers through the process of addressing edits.
The agency with which you file resubmissions of your HMDA data:
A resubmission means that you have already filed your HMDA submission and received a confirmation receipt, but you are submitting again for the same filing year. Beginning with data collected in 2017, filers will resubmit their HMDA data to the Bureau.
The Officer Certification process:
As part of the submission process, an authorized representative of your institution with knowledge of the data submitted shall certify to the accuracy and completeness of the data submitted. Filers will not fax or e-mail the signed certification.
The contact information for HMDA Help:
Technical questions about reporting HMDA data collected in or after 2017 should be directed to hmdahelp@cfpb.gov.
Technical questions about reporting HMDA data collected in or before 2016 should be directed to hmdahelp@frb.gov.
3. 2024 File Specifications
3.1 Introduction
The following information describes the format used when filing HMDA data with the Bureau.
3.2 Submission instructions
Filers will submit their HMDA data using a web interface. Information regarding the HMDA Platform can be located at: https://ffiec.cfpb.gov.
- We recommend that HMDA filers use a modern browser, such as the latest version of Google Chrome™, Mozilla® Firefox®, Microsoft Edge™, or other modern browsers.
The HMDA Platform will walk you through the loan/application register filing process.
Certification will also occur within the HMDA Platform. An authorized representative of your institution with knowledge of the data submitted shall certify to the accuracy and completeness of the data submitted.
3.3 Loan/Application Register format
Beginning with data collected in 2017, your HMDA data loan/application register will be submitted in a pipe (also referred to as vertical bar) delimited text file format. This means that:
-
Each data field within each row will be separated with a pipe character, “|”.
-
Do not include leading zeros for the purpose of making a data field a specific number of characters.
-
The loan/application register will be a text file with a .txt file format extension.
-
Do not encase text entries in single or double quotes.
Text entries in alphanumeric fields do not need to use all uppercase letters with the exception of:
-
“NA” used when the reporting requirement is not applicable;
-
Two-letter state codes;
-
A capital “E” at the beginning of any “Exempt” response.
As with previous submissions:
-
The first row of the loan/application register will begin with the number one (1) to indicate that the data fields in row one contain information relating to your institution.
-
All subsequent rows of the loan/application register will begin with the number two (2) to indicate that the data fields beginning in row two contain data fields for the loan/application register, with information relating to the reported loan or application.
-
Each covered loan or application must appear on its own line in the loan/application register.
3.4 Information regarding data fields
Table 1 and Table 2 contain the data field name, data field type, valid values for numeric fields, examples for alphanumeric fields, and the data point name, where applicable. Please refer to Regulation C and the Data Specifications section for details regarding each data field.
TABLE 1: FILING INSTITUTION, REPORTING PERIOD, AND CONTACT INFORMATION (TRANSMITTAL SHEET)
Table 1 | ||||
---|---|---|---|---|
Data Field Number | Data Field Name | Data Field Type | Valid Values | Descriptions and Examples |
Record Identifier – Value is 1 | Numeric | 1 | ||
Financial Institution Name | Alphanumeric | Example: Ficus Bank | ||
Calendar Year | Numeric | Example: 2024 | ||
Calendar Quarter | Numeric | 4 | Description: 4. Annual submissions for all HMDA filers for covered loans and applications with respect to which final action was taken from January 1st (01/01) and December 31st (12/31) Codes 1, 2, and 3 are used only during quarterly filing by institutions required to report data quarterly [1]. More information on quarterly filing is found in the Supplemental Guide for Quarterly Filers . | |
Contact Person’s Name | Alphanumeric | Example: Erika Otis | ||
Contact Person’s Telephone Number | Alphanumeric | Example: 999-999-9999 | ||
Contact Person’s E-mail Address | Alphanumeric | Example: erikaotis@bank.com | ||
Contact Person’s Office Street Address | Alphanumeric | Example: 4321 W Random Blvd Ste 201 | ||
Contact Person’s Office City | Alphanumeric | Example: Somecity | ||
Contact Person’s Office State | Alphanumeric | Example: CA | ||
Contact Person’s Office ZIP Code | Alphanumeric | Example: 90049-9998 | ||
Federal Agency | Numeric | 1 2 3 5 7 9 | Descriptions: 1. Office of the Comptroller of the Currency (OCC) 2. Federal Reserve System (FRS) 3. Federal Deposit Insurance Corporation (FDIC) 5. National Credit Union Administration (NCUA) 7. United States Department of Housing and Urban Development (HUD) 9. Consumer Financial Protection Bureau (Bureau) | |
Total Number of Entries Contained in Submission | Numeric | Example: 5000 | ||
Federal Taxpayer Identification Number | Alphanumeric | Example: 99-9999999 | ||
Legal Entity Identifier (LEI) | Alphanumeric; Width is 20 characters | Example: 10BX939C5543TQA1144M |
TABLE 2: LOAN/APPLICATION REGISTER
Table 2 | |||||
---|---|---|---|---|---|
Data Field Number | Data Field Name | Data Field Type | Valid Values | Descriptions and Examples | Data Point Name |
Record Identifier – Value is 2 | Numeric | 2 | |||
Legal Entity Identifier (LEI) | Alphanumeric; Width is 20 characters | Example: 10BX939C5543TQA1144M | Legal Entity Identifier (LEI) | ||
Universal Loan Identifier (ULI) or Non-Universal Loan Identifier (NULI) | Alphanumeric; Width up to 45 characters | ULI Example: 10BX939C5543TQA1144M999143X38 NULI Example: 999143X | Universal Loan Identifier (ULI) or Non-Universal Loan Identifier (NULI) | ||
Application Date | Alphanumeric | Example: 20230721 (or) NA | Application Date | ||
Loan Type | Numeric | 1 2 3 4 | Descriptions: 1. Conventional (not insured or guaranteed by FHA, VA, RHS, or FSA) 2. Federal Housing Administration insured (FHA) 3. Veterans Affairs guaranteed (VA) 4. USDA Rural Housing Service or Farm Service Agency guaranteed (RHS or FSA) | Loan Type | |
Loan Purpose | Numeric | 1 2 31 32 4 5 | Descriptions: 1. Home purchase 2. Home improvement 31. Refinancing 32. Cash-out refinancing 4. Other purpose 5. Not applicable | Loan Purpose | |
Preapproval | Numeric | 1 2 | Descriptions: 1. Preapproval requested 2. Preapproval not requested | Preapproval | |
Construction Method | Numeric | 1 2 | Descriptions: 1. Site-built 2. Manufactured Home | Construction Method | |
Occupancy Type | Numeric | 1 2 3 | Descriptions: 1. Principal residence 2. Second residence 3. Investment property | Occupancy Type | |
Loan Amount | Numeric | Example: 110500 (or) 110500.00 | Loan Amount | ||
Action Taken | Numeric | 1 2 3 4 5 6 7 8 | Descriptions: 1. Loan originated 2. Application approved but not accepted 3. Application denied 4. Application withdrawn by applicant 5. File closed for incompleteness 6. Purchased loan 7. Preapproval request denied 8. Preapproval request approved but not accepted | Action Taken | |
Action Taken Date | Numeric | Example: 20240721 | Action Taken Date | ||
Street Address | Alphanumeric | Example: 456 W Somewhere Ave Apt 201 (or) NA (or) Exempt | Property Address | ||
City | Alphanumeric | Example: Anytown (or) NA (or) Exempt | Property Address | ||
State 3 | Alphanumeric | Example: CA (or) NA | Property Location & Property Address | ||
ZIP Code | Alphanumeric | Example: 90049-9998 (or) NA (or) Exempt | Property Address | ||
County | Alphanumeric | Example: 06037 (or) NA | Property Location | ||
Census Tract | Alphanumeric | Example: 06037264000 (or) NA | Property Location | ||
Ethnicity of Applicant or Borrower: 1 | Numeric | 1 11 12 13 14 2 3 4 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino 3. Information not provided by applicant in mail, internet, or telephone application 4. Not applicable If the Applicant or Borrower did not select any ethnicity(ies), but only provided ethnicity(ies) in the Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino, either leave this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Applicant or Borrower: 2 | Numeric | 1 11 12 13 14 2 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino If this data field does not contain an entry, leave it blank. If the Applicant or Borrower provided ethnicity(ies) in the Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino, and did not select Code 14, either leave this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Applicant or Borrower: 3 | Numeric | 1 11 12 13 14 2 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino If this data field does not contain an entry, leave it blank. If the Applicant or Borrower provided ethnicity(ies) in the Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino, and did not select Code 14, either leave this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Applicant or Borrower: 4 | Numeric | 1 11 12 13 14 2 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino If this data field does not contain an entry, leave it blank. If the Applicant or Borrower provided ethnicity(ies) in the Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino, and did not select Code 14, either leave this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Applicant or Borrower: 5 | Numeric | 1 11 12 13 14 2 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino If this data field does not contain an entry, leave it blank. If the Applicant or Borrower provided ethnicity(ies) in the Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino, and did not select Code 14, either leave this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino | Alphanumeric; Width up to 100 characters | Specify in text the Applicant’s or Borrower’s Other Hispanic or Latino ethnicity(ies) provided by the Applicant or Borrower. Otherwise, leave this data field blank. | Ethnicity | ||
Ethnicity of Co-Applicant or Co-Borrower: 1 | Numeric | 1 11 12 13 14 2 3 4 5 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino 3. Information not provided by applicant in mail, internet, or telephone application 4. Not applicable 5. No co-applicant If the Co-Applicant or Co-Borrower did not select any ethnicity(ies), but only provided ethnicity(ies) in the Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino, either leave this this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Co-Applicant or Co-Borrower: 2 | Numeric | 1 11 12 13 14 2 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino If this data field does not contain an entry, leave it blank. If the Co-Applicant or Co-Borrower provided ethnicity(ies) in the Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino, and did not select Code 14, either leave this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Co-Applicant or Co-Borrower: 3 | Numeric | 1 11 12 13 14 2 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino If this data field does not contain an entry, leave it blank. If the Co-Applicant or Co-Borrower provided ethnicity(ies) in the Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino, and did not select Code 14, either leave this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Co-Applicant or Co-Borrower: 4 | Numeric | 1 11 12 13 14 2 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino If this data field does not contain an entry, leave it blank. If the Co-Applicant or Co-Borrower provided ethnicity(ies) in the Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino, and did not select Code 14, either leave this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Co-Applicant or Co-Borrower: 5 | Numeric | 1 11 12 13 14 2 | Descriptions: 1. Hispanic or Latino 11. Mexican 12. Puerto Rican 13. Cuban 14. Other Hispanic or Latino 2. Not Hispanic or Latino If this data field does not contain an entry, leave it blank. If the Co-Applicant or Co-Borrower provided ethnicity(ies) in the Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino, and did not select Code 14, either leave this data field blank or enter Code 14. | Ethnicity | |
Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino | Alphanumeric; Width up to 100 characters | Specify in text the Co-Applicant’s or Co-Borrower’s Other Hispanic or Latino ethnicity(ies) provided by the Co-Applicant or Co-Borrower. Otherwise, leave this data field blank. | Ethnicity | ||
Ethnicity of Applicant or Borrower Collected on the Basis of Visual Observation or Surname | Numeric | 1 2 3 | Descriptions: 1. Collected on the basis of visual observation or surname 2. Not collected on the basis of visual observation or surname 3. Not applicable | Ethnicity | |
Ethnicity of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | Numeric | 1 2 3 4 | Descriptions: 1. Collected on the basis of visual observation or surname 2. Not collected on the basis of visual observation or surname 3. Not applicable 4. No co-applicant | Ethnicity | |
Race of Applicant or Borrower: 1 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 6 7 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White 6. Information not provided by applicant in mail, internet, or telephone application 7. Not applicable If the Applicant or Borrower did not select any race(s) and only provided race(s) in the Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Applicant or Borrower: Free Form Text Field for Other Asian, and/or Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander, either leave this data field blank or enter, as appropriate, Code 1, 27, or 44. | Race | |
Race of Applicant or Borrower: 2 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White If this data field does not contain an entry, leave it blank. If the Applicant or Borrower provided race(s) in the Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Applicant or Borrower: Free Form Text Field for Other Asian, and/or Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander, and did not select Code 1, 27, or 44, either leave this data field blank or enter Code 1, 27, or 44. | Race | |
Race of Applicant or Borrower: 3 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White If this data field does not contain an entry, leave it blank. If the Applicant or Borrower provided race(s) in the Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Applicant or Borrower: Free Form Text Field for Other Asian, and/or Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander, and did not select Code 1, 27, or 44, either leave this data field blank or enter Code 1, 27, or 44. | Race | |
Race of Applicant or Borrower: 4 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White If this data field does not contain an entry, leave it blank. If the Applicant or Borrower provided race(s) in the Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Applicant or Borrower: Free Form Text Field for Other Asian, and/or Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander, and did not select Code 1, 27, or 44, either leave this data field blank or enter Code 1, 27, or 44. | Race | |
Race of Applicant or Borrower: 5 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White If this data field does not contain an entry, leave it blank. If the Applicant or Borrower provided race(s) in the Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Applicant or Borrower: Free Form Text Field for Other Asian, and/or Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander, and did not select Code 1, 27, or 44, either leave this data field blank or enter Code 1, 27, or 44. | Race | |
Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe | Alphanumeric; Width up to 100 characters | Specify in text the Applicant’s or Borrower’s American Indian or Alaska Native Enrolled or Principal Tribe if provided by the Applicant or Borrower. Otherwise, leave this data field blank. | Race | ||
Race of Applicant or Borrower: Free Form Text Field for Other Asian | Alphanumeric; Width up to 100 characters | Specify in text the Applicant’s or Borrower’s Other Asian race(s) provided by the Applicant or Borrower. Otherwise, leave this data field blank. | Race | ||
Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander | Alphanumeric; Width up to 100 characters | Specify in text the Applicant’s or Borrower’s Other Pacific Islander race(s) provided by the Applicant or Borrower. Otherwise, leave this data field blank. | Race | ||
Race of Co-Applicant or Co-Borrower: 1 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 6 7 8 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White 6. Information not provided by applicant in mail, internet, or telephone application 7. Not applicable 8. No co-applicant If the Co-Applicant or Co-Borrower did not select any race(s) and only provided race(s) in the Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian, and/or Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander, either leave this data field blank or enter, as appropriate, Code 1, 27, or 44. | Race | |
Race of Co-Applicant or Co-Borrower: 2 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White If this data field does not contain an entry, leave it blank. If the Co-Applicant or Co-Borrower provided race(s) in the Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian, and/or Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander, and did not select Code 1, 27, or 44, either leave this data field blank or enter Code 1, 27, or 44. | Race | |
Race of Co-Applicant or Co-Borrower: 3 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White If this data field does not contain an entry, leave it blank. If the Co-Applicant or Co-Borrower provided race(s) in the Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian, and/or Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander, and did not select Code 1, 27, or 44, either leave this data field blank or enter Code 1, 27, or 44. | Race | |
Race of Co-Applicant or Co-Borrower: 4 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White If this data field does not contain an entry, leave it blank. If the Co-Applicant or Co-Borrower provided race(s) in the Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian, and/or Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander, and did not select Code 1, 27, or 44, either leave this data field blank or enter Code 1, 27, or 44. | Race | |
Race of Co-Applicant or Co-Borrower: 5 | Numeric | 1 2 21 22 23 24 25 26 27 3 4 41 42 43 44 5 | Descriptions: 1. American Indian or Alaska Native 2. Asian 21. Asian Indian 22. Chinese 23. Filipino 24. Japanese 25. Korean 26. Vietnamese 27. Other Asian 3. Black or African American 4. Native Hawaiian or Other Pacific Islander 41. Native Hawaiian 42. Guamanian or Chamorro 43. Samoan 44. Other Pacific Islander 5. White If this data field does not contain an entry, leave it blank. If the Co-Applicant or Co-Borrower provided race(s) in the Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian, and/or Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander, and did not select Code 1, 27, or 44, either leave this data field blank or enter Code 1, 27, or 44. | Race | |
Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe | Alphanumeric; Width up to 100 characters | Specify in text the Co-Applicant’s or Co-Borrower’s American Indian or Alaska Native Enrolled or Principal Tribe if provided by the Co-Applicant or Co-Borrower. Otherwise, leave this data field blank. | Race | ||
Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian | Alphanumeric; Width up to 100 characters | Specify in text the Co-Applicant’s or Co-Borrower’s Other Asian race(s) provided by the Co-Applicant or Co-Borrower. Otherwise, leave this data field blank. | Race | ||
Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander | Alphanumeric; Width up to 100 characters | Specify in text the Co-Applicant’s or Co-Borrower’s Other Pacific Islander race(s) provided by the Co-Applicant or Co-Borrower. Otherwise, leave this data field blank. | Race | ||
Race of Applicant or Borrower Collected on the Basis of Visual Observation or Surname | Numeric | 1 2 3 | Descriptions: 1. Collected on the basis of visual observation or surname 2. Not collected on the basis of visual observation or surname 3. Not applicable | Race | |
Race of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | Numeric | 1 2 3 4 | Descriptions: 1. Collected on the basis of visual observation or surname 2. Not collected on the basis of visual observation or surname 3. Not applicable 4. No co-applicant | Race | |
Sex of Applicant or Borrower | Numeric | 1 2 3 4 6 | Descriptions: 1. Male 2. Female 3. Information not provided by applicant in mail, internet, or telephone application 4. Not applicable 6. Applicant selected both male and female | Sex | |
Sex of Co-Applicant or Co-Borrower | Numeric | 1 2 3 4 5 6 | Descriptions: 1. Male 2. Female 3. Information not provided by applicant in mail, internet, or telephone application 4. Not applicable 5. No co-applicant 6. Co-applicant selected both male and female | Sex | |
Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname | Numeric | 1 2 3 | Descriptions: 1. Collected on the basis of visual observation or surname 2. Not collected on the basis of visual observation or surname 3. Not applicable | Sex | |
Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | Numeric | 1 2 3 4 | Descriptions: 1. Collected on the basis of visual observation or surname 2. Not collected on the basis of visual observation or surname 3. Not applicable 4. No co-applicant | Sex | |
Age of Applicant or Borrower | Numeric | 8888 | Example: 24 (or) Descriptions: 8888. Not applicable | Age | |
Age of Co-Applicant or Co-Borrower | Numeric | 8888 9999 | Example: 24 (or) Descriptions: 8888. Not applicable 9999. No co-applicant | Age | |
Income | Alphanumeric | Example: 36 (or) -36 (or) NA | Income | ||
Type of Purchaser | Numeric | 0 1 2 3 4 5 6 71 72 8 9 | Descriptions: 0. Not applicable 1. Fannie Mae 2. Ginnie Mae 3. Freddie Mac 4. Farmer Mac 5. Private securitizer 6. Commercial bank, savings bank, or savings association 71. Credit union, mortgage company, or finance company 72. Life insurance company 8. Affiliate institution 9. Other type of purchaser | Type of Purchaser | |
Rate Spread | Alphanumeric | Example: 0.428 (or) -0.428 (or) NA (or) Exempt | Rate Spread | ||
HOEPA Status | Numeric | 1 2 3 | Descriptions: 1. High-cost mortgage 2. Not a high-cost mortgage 3. Not applicable | HOEPA Status | |
Lien Status | Numeric | 1 2 | Descriptions: 1. Secured by a first lien 2. Secured by a subordinate lien | Lien Status | |
Credit Score of Applicant or Borrower | Numeric | 7777 8888 1111 | Example: 650 (or) Descriptions: 7777. Credit score is not a number 8888. Not applicable 1111. Exempt | Credit Score | |
Credit Score of Co-Applicant or Co-Borrower | Numeric | 7777 8888 9999 1111 | Example: 650 (or) Descriptions: 7777. Credit score is not a number 8888. Not applicable 9999. No co-applicant 1111. Exempt | Credit Score | |
Applicant or Borrower, Name and Version of Credit Scoring Model | Numeric | 1 2 3 4 5 6 7 8 9 11 12 13 14 15 1111 | Descriptions: 1. Equifax Beacon 5.0 2. Experian Fair Isaac Risk Model v2 3. TransUnion FICO Risk Score Classic 04 4. TransUnion FICO Risk Score Classic 98 5. VantageScore 2.0 6. VantageScore 3.0 7. More than one credit scoring model 8. Other credit scoring model 9. Not applicable 11. FICO Score 9 12. FICO Score 8 13. FICO Score 10 14. FICO Score 10T 15. VantageScore 4.0 1111. Exempt | Credit Score | |
Applicant or Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 | Alphanumeric; Width up to 100 characters | Specify in text the applicant’s or borrower’s Other credit scoring model if 8 is entered. Otherwise, leave this data field blank. | Credit Score | ||
Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model | Numeric | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1111 | Descriptions: 1. Equifax Beacon 5.0 2. Experian Fair Isaac Risk Model v2 3. TransUnion FICO Risk Score Classic 04 4. TransUnion FICO Risk Score Classic 98 5. VantageScore 2.0 6. VantageScore 3.0 7. More than one credit scoring model 8. Other credit scoring model 9. Not applicable 10. No co-applicant 11. FICO Score 9 12. FICO Score 8 13. FICO Score 10 14. FICO Score 10T 15. VantageScore 4.0 1111. Exempt | Credit Score | |
Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 | Alphanumeric; Width up to 100 characters | Specify in text the co-applicant’s or co-borrower’s Other credit scoring model if 8 is entered. Otherwise, leave this data field blank. | Credit Score | ||
Reason for Denial: 1 | Numeric | 1 2 3 4 5 6 7 8 9 10 1111 | Descriptions: 1. Debt-to-income ratio 2. Employment history 3. Credit history 4. Collateral 5. Insufficient cash (downpayment, closing costs) 6. Unverifiable information 7. Credit application incomplete 8. Mortgage insurance denied 9. Other 10. Not applicable 1111. Exempt | Reason for Denial | |
Reason for Denial: 2 | Numeric | 1 2 3 4 5 6 7 8 9 | Descriptions: 1. Debt-to-income ratio 2. Employment history 3. Credit history 4. Collateral 5. Insufficient cash (downpayment, closing costs) 6. Unverifiable information 7. Credit application incomplete 8. Mortgage insurance denied 9. Other If this data field does not contain an entry, leave it blank | Reason for Denial | |
Reason for Denial: 3 | Numeric | 1 2 3 4 5 6 7 8 9 | Descriptions: 1. Debt-to-income ratio 2. Employment history 3. Credit history 4. Collateral 5. Insufficient cash (downpayment, closing costs) 6. Unverifiable information 7. Credit application incomplete 8. Mortgage insurance denied 9. Other If this data field does not contain an entry, leave it blank | Reason for Denial | |
Reason for Denial: 4 | Numeric | 1 2 3 4 5 6 7 8 9 | Descriptions: 1. Debt-to-income ratio 2. Employment history 3. Credit history 4. Collateral 5. Insufficient cash (downpayment, closing costs) 6. Unverifiable information 7. Credit application incomplete 8. Mortgage insurance denied 9. Other If this data field does not contain an entry, leave it blank | Reason for Denial | |
Reason for Denial: Conditional Free Form Text Field for Code 9 | Alphanumeric; Width up to 255 characters | Specify in text the Other Denial Reason(s) if Code 9 is entered. Otherwise, leave this data field blank. | Reason for Denial | ||
Total Loan Costs | Alphanumeric | Example: 2399.04 (or) NA (or) Exempt | Total Loan Costs or Total Points and Fees | ||
Total Points and Fees | Alphanumeric | Example: 2399.04 (or) NA (or) Exempt | Total Loan Costs or Total Points and Fees | ||
Origination Charges | Alphanumeric | Example: 2399.04 (or) NA (or) Exempt | Origination Charges | ||
Discount Points | Alphanumeric | Example: 2399.04 (or) NA (or) Exempt If no points were paid, leave this data field blank | Discount Points | ||
Lender Credits | Alphanumeric | Example: 1500.24 (or) NA (or) Exempt If no lender credits were provided, leave this data field blank | Lender Credits | ||
Interest Rate | Alphanumeric | Example: 4.125 (or) NA (or) Exempt | Interest Rate | ||
Prepayment Penalty Term | Alphanumeric | Example: 24 (or) NA (or) Exempt | Prepayment Penalty Term | ||
Debt-to-Income Ratio | Alphanumeric | Example: 42.95 (or) -42.95 (or) NA (or) Exempt | Debt-to-Income Ratio | ||
Combined Loan-to-Value Ratio | Alphanumeric | Example: 80.05 (or) NA (or) Exempt | Combined Loan-to-Value Ratio | ||
Loan Term | Alphanumeric | Example: 360 (or) NA (or) Exempt | Loan Term | ||
Introductory Rate Period | Alphanumeric | Example: 24 (or) NA (or) Exempt | Introductory Rate Period | ||
Balloon Payment | Numeric | 1 2 1111 | Descriptions: 1. Balloon payment 2. No balloon payment 1111. Exempt | Non-Amortizing Features | |
Interest-Only Payments | Numeric | 1 2 1111 | Descriptions: 1. Interest-only payments 2. No interest-only payments 1111. Exempt | Non-Amortizing Features | |
Negative Amortization | Numeric | 1 2 1111 | Descriptions: 1. Negative amortization 2. No negative amortization 1111. Exempt | Non-Amortizing Features | |
Other Non-Amortizing Features | Numeric | 1 2 1111 | Descriptions: 1. Other non-fully amortizing features 2. No other non-fully amortizing features 1111. Exempt | Non-Amortizing Features | |
Property Value | Alphanumeric | Example: 350500 (or) NA (or) Exempt | Property Value | ||
Manufactured Home Secured Property Type | Numeric | 1 2 3 1111 | Descriptions: 1. Manufactured home and land 2. Manufactured home and not land 3. Not applicable 1111. Exempt | Manufactured Home Secured Property Type | |
Manufactured Home Land Property Interest | Numeric | 1 2 3 4 5 1111 | Descriptions: 1. Direct ownership 2. Indirect ownership 3. Paid leasehold 4. Unpaid leasehold 5. Not applicable 1111. Exempt | Manufactured Home Land Property Interest | |
Total Units | Numeric | Example: 5 | Total Units | ||
Multifamily Affordable Units | Alphanumeric | Example: 5 (or) NA (or) Exempt | Multifamily Affordable Units | ||
Submission of Application | Numeric | 1 2 3 1111 | Descriptions: 1. Submitted directly to your institution 2. Not submitted directly to your institution 3. Not applicable 1111. Exempt | Application Channel | |
Initially Payable to Your Institution | Numeric | 1 2 3 1111 | Descriptions: 1. Initially payable to your institution 2. Not initially payable to your institution 3. Not applicable 1111. Exempt | Application Channel | |
Mortgage Loan Originator NMLSR Identifier | Alphanumeric | Example: 123450 (or) NA (or) Exempt | Mortgage Loan Originator NMLSR Identifier | ||
Automated Underwriting System: 1 | Numeric | 1 2 3 4 5 6 7 1111 | Descriptions: 1. Desktop Underwriter (DU) 2. Loan Prospector (LP) or Loan Product Advisor 3. Technology Open to Approved Lenders (TOTAL) Scorecard 4. Guaranteed Underwriting System (GUS) 5. Other 6. Not applicable 7. Internal Proprietary System 1111. Exempt | Automated Underwriting System | |
Automated Underwriting System: 2 | Numeric | 1 2 3 4 5 7 | Descriptions: 1. Desktop Underwriter (DU) 2. Loan Prospector (LP) or Loan Product Advisor 3. Technology Open to Approved Lenders (TOTAL) Scorecard 4. Guaranteed Underwriting System (GUS) 5. Other 7. Internal Proprietary System If this data field does not contain an entry, leave it blank | Automated Underwriting System | |
Automated Underwriting System: 3 | Numeric | 1 2 3 4 5 7 | Descriptions: 1. Desktop Underwriter (DU) 2. Loan Prospector (LP) or Loan Product Advisor 3. Technology Open to Approved Lenders (TOTAL) Scorecard 4. Guaranteed Underwriting System (GUS) 5. Other 7. Internal Proprietary System If this data field does not contain an entry, leave it blank | Automated Underwriting System | |
Automated Underwriting System: 4 | Numeric | 1 2 3 4 5 7 | Descriptions: 1. Desktop Underwriter (DU) 2. Loan Prospector (LP) or Loan Product Advisor 3. Technology Open to Approved Lenders (TOTAL) Scorecard 4. Guaranteed Underwriting System (GUS) 5. Other 7. Internal Proprietary System If this data field does not contain an entry, leave it blank | Automated Underwriting System | |
Automated Underwriting System: 5 | Numeric | 1 2 3 4 5 7 | Descriptions: 1. Desktop Underwriter (DU) 2. Loan Prospector (LP) or Loan Product Advisor 3. Technology Open to Approved Lenders (TOTAL) Scorecard 4. Guaranteed Underwriting System (GUS) 5. Other 7. Internal Proprietary System If this data field does not contain an entry, leave it blank | Automated Underwriting System | |
Automated Underwriting System: Conditional Free Form Text Field for Code 5 | Alphanumeric; Width up to 255 characters | Specify in text the Other Automated Underwriting System(s) if 5 is entered. Otherwise, leave this data field blank. | Automated Underwriting System | ||
Automated Underwriting System Result: 1 | Numeric | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1111 | Descriptions: 1. Approve/Eligible 2. Approve/Ineligible 3. Refer/Eligible 4. Refer/Ineligible 5. Refer with Caution 6. Out of Scope 7. Error 8. Accept 9. Caution 10. Ineligible 11. Incomplete 12. Invalid 13. Refer 14. Eligible 15. Unable to Determine or Unknown 16. Other 17. Not applicable 18. Accept/Eligible 19. Accept/Ineligible 20. Accept/Unable to Determine 21. Refer with Caution/Eligible 22. Refer with Caution/Ineligible 23. Refer/Unable to Determine 24. Refer with Caution/Unable to Determine 1111. Exempt | Automated Underwriting System | |
Automated Underwriting System Result: 2 | Numeric | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 | Descriptions: 1. Approve/Eligible 2. Approve/Ineligible 3. Refer/Eligible 4. Refer/Ineligible 5. Refer with Caution 6. Out of Scope 7. Error 8. Accept 9. Caution 10. Ineligible 11. Incomplete 12. Invalid 13. Refer 14. Eligible 15. Unable to Determine or Unknown 16. Other 18. Accept/Eligible 19. Accept/Ineligible 20. Accept/Unable to Determine 21. Refer with Caution/Eligible 22. Refer with Caution/Ineligible 23. Refer/Unable to Determine 24. Refer with Caution/Unable to Determine If this data field does not contain an entry, leave it blank | Automated Underwriting System | |
Automated Underwriting System Result: 3 | Numeric | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 | Descriptions: 1. Approve/Eligible 2. Approve/Ineligible 3. Refer/Eligible 4. Refer/Ineligible 5. Refer with Caution 6. Out of Scope 7. Error 8. Accept 9. Caution 10. Ineligible 11. Incomplete 12. Invalid 13. Refer 14. Eligible 15. Unable to Determine or Unknown 16. Other 18. Accept/Eligible 19. Accept/Ineligible 20. Accept/Unable to Determine 21. Refer with Caution/Eligible 22. Refer with Caution/Ineligible 23. Refer/Unable to Determine 24. Refer with Caution/Unable to Determine If this data field does not contain an entry, leave it blank | Automated Underwriting System | |
Automated Underwriting System Result: 4 | Numeric | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 | Descriptions: 1. Approve/Eligible 2. Approve/Ineligible 3. Refer/Eligible 4. Refer/Ineligible 5. Refer with Caution 6. Out of Scope 7. Error 8. Accept 9. Caution 10. Ineligible 11. Incomplete 12. Invalid 13. Refer 14. Eligible 15. Unable to Determine or Unknown 16. Other 18. Accept/Eligible 19. Accept/Ineligible 20. Accept/Unable to Determine 21. Refer with Caution/Eligible 22. Refer with Caution/Ineligible 23. Refer/Unable to Determine 24. Refer with Caution/Unable to Determine If this data field does not contain an entry, leave it blank | Automated Underwriting System | |
Automated Underwriting System Result: 5 | Numeric | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 19 20 21 22 23 24 | Descriptions: 1. Approve/Eligible 2. Approve/Ineligible 3. Refer/Eligible 4. Refer/Ineligible 5. Refer with Caution 6. Out of Scope 7. Error 8. Accept 9. Caution 10. Ineligible 11. Incomplete 12. Invalid 13. Refer 14. Eligible 15. Unable to Determine or Unknown 16. Other 18. Accept/Eligible 19. Accept/Ineligible 20. Accept/Unable to Determine 21. Refer with Caution/Eligible 22. Refer with Caution/Ineligible 23. Refer/Unable to Determine 24. Refer with Caution/Unable to Determine If this data field does not contain an entry, leave it blank | Automated Underwriting System | |
Automated Underwriting System Result: Conditional Free Form Text Field for Code 16 | Alphanumeric; Width up to 255 characters | Specify in text the Other Automated Underwriting System Result(s) if 16 is entered. Otherwise, leave this data field blank. | Automated Underwriting System | ||
Reverse Mortgage | Numeric | 1 2 1111 | Descriptions: 1. Reverse mortgage 2. Not a reverse mortgage 1111. Exempt | Reverse Mortgage | |
Open-End Line of Credit | Numeric | 1 2 1111 | Descriptions: 1. Open-end line of credit 2. Not an open-end line of credit 1111. Exempt | Open-End Line of Credit | |
Business or Commercial Purpose | Numeric | 1 2 1111 | Descriptions: 1. Primarily for a business or commercial purpose 2. Not primarily for a business or commercial purpose 1111. Exempt | Business or Commercial Purpose |
3: Reporting of the State data field is subject to the requirements of both Property Address, provided in 1003.4(a)(9)(i), and Property Location, provided in 1003.4(a)(9)(ii).
4. 2024 Data Specifications
4.1 Introduction
This section provides instructions on entering data in the loan/application register for HMDA data collected in 2024. This document is not a substitute for Regulation C. Refer to Regulation C for a complete explanation of the reporting requirement for each data field.
Data fields are presented in the order they are recorded in the loan/application register. Data fields are identified by the corresponding 2024 File Specifications table and data field number, followed by the Regulation C paragraph containing the relevant reporting requirements. For example, (1-2) Paragraph 5(a)(3)(i) refers to the data field listed in table 1, data field 2 in the 2023 File Specifications document, and the reporting requirement found at 12 CFR § 1003.5(a)(3)(i). The blue underlined words provide hyperlinks to the referenced Regulation C paragraph.
4.2 Data format and itemization
4.2.1 Filing institution, reporting period, and contact information
Please provide the following information regarding your institution in the format described in each paragraph below.
(1-2) Paragraph 5(a)(3)(i) — Financial Institution.
Enter the name of the financial institution that is submitting HMDA data.
Example: If the submission contains HMDA data for Ficus Bank, enter Ficus Bank.
(1-3 to 1-4) Paragraph 5(a)(3)(ii) — Calendar Year and Calendar Quarter.
- Calendar Year. Enter, in numeral form, the calendar year the data submission covers, using YYYY format.
Example: If the data covers calendar year 2023, enter 2023.
- Calendar Quarter. Indicate the calendar quarter the data submission covers by entering the applicable Code from the following:
Code 4—Annual submissions for covered loans and applications with respect to which final action was taken from January 1 (01/01) and December 31 (12/31)
a. Codes for individual calendar quarters (1-3) are used only by financial institutions required to report HMDA data quarterly effective January 1, 2020. Further instructions for reporting quarterly data can be found in the Supplemental Guide for Quarterly Filers.
(1-5 to 1-11) Paragraph 5(a)(3)(iii) — Contact Person.
Enter the name, telephone number, e-mail address, and office address of a person who may be contacted with questions about your institution's submission.
- Contact Person's Name.
Example: If the contact person's name is Erika Otis, enter Erika Otis.
- Contact Person's Telephone Number.
Example: If the phone number is (999) 999-9999, enter 999-999-9999. 3. Contact Person's E-mail Address.
Example: If the e-mail address is erikaotis@bank.com, enter erikaotis@bank.com.
- Contact Person's Office Address. Enter the street address, city, state, and ZIP code.
Example:
a. Contact Person's Office Street Address. Enter the street address of the contact person's office as one (1) data field. U.S. Postal Service Publication 28, Sub-Sections 231–239 can be used as a guide for formatting the street address. Address components include, as applicable, the following individual items:
- Primary Address Number
- Predirectional
- Street Name
- Prefix
- Suffix
- Postdirectional
- Secondary Address Identifier, such as suite
- Secondary Address, such as suite number
Example:
4321 W Random Blvd Ste 201
Primary Address Number: "4321"
Predirectional: "W"
Street Name: "Random"
Suffix: "Blvd"
Secondary Address Identifier: "Ste"
Secondary Address: "201"
a. Contact Person's Office City. Enter the city of the contact person's office as one (1) data field.
b. Contact Person's Office State. Enter the two-letter state code of the contact person's office as one (1) data field.
c. Contact Person's Office ZIP Code. Enter the ZIP code of the contact person's office as one (1) data field.
d. Non-Standard Addressing. U.S. Postal Service Publication 28, Sub-Sections 24, 25, and 29, respectively, can be used as guides for formatting non-standard style addressing including rural route, Highway Contract Route, and Puerto Rico addresses.
e. The following address formats are generally not preferred:
- General Delivery addresses, such as General Delivery, Anytown, CA 90049-9998.
- Post Office Box addresses, such as P.O. Box 100 Anytown, CA 90049-9998.
- Spelled-out numbers, such as Four Hundred Fifty Six W Somewhere Ave Apt Two Hundred One.
(1-12) Paragraph 5(a)(3)(iv) — Federal Agency.
Indicate your financial institution's appropriate Federal agency by entering the applicable Code from the following:
Code 1—Office of the Comptroller of the Currency (OCC)
Code 2—Federal Reserve System (FRS)
Code 3—Federal Deposit Insurance Corporation (FDIC)
Code 5—National Credit Union Administration (NCUA)
Code 7—United States Department of Housing and Urban Development (HUD)
Code 9—Consumer Financial Protection Bureau (Bureau)
(1-13) Paragraph 5(a)(3)(v) — Total Number of Entries Contained in Submission.
Enter, in numeral form, the total number of entries contained in the submission.
Example: If your institution is submitting 5,000 entries, enter 5000.
(1-14) Paragraph 5(a)(3)(vi) — Federal Taxpayer Identification Number.
Enter your financial institution's Federal Taxpayer Identification Number.
Example: If your institution's Federal Taxpayer Identification number is 99-9999999, enter 99-9999999.
(1-15 and 2-2)Paragraph 5(a)(3)(vii) — Legal Entity Identifier (LEI).
Enter your financial institution's LEI as defined in Paragraph 4(a)(1)(i)(A).
Example: If your institution's LEI is 10BX939C5543TQA1144M, enter 10BX939C5543TQA1144M.
4.2.2 Loan/Application Register
Please provide the following data fields for each application for a covered loan your institution receives, each covered loan that your institution originates, and each covered loan that your institution purchases in the format described in each paragraph below.
(2-3) Paragraph 4(a)(1)(i) — Universal Loan Identifier (ULI) or Non-Universal Loan Identifier (NULI)
Enter the ULI assigned to the covered loan or application. Your financial institution shall assign and report a ULI that:
-
Begins with the financial institution's Legal Entity Identifier as defined in Paragraph 4(a)(1)(i)(A).
-
Follows the Legal Entity Identifier with up to 23 additional characters to identify the covered loan or application, which:
- May be letters, numerals, or a combination of letters and numerals;
- Must be unique within the financial institution; and
- Must not include any information that could be used to directly identify the applicant or borrower.
- Ends with a two-character check digit that is calculated using the ISO/IEC 7064, MOD 97-10 as it appears on the International Standard ISO/IEC 7064:2003, which is published by the International Organization for Standardization (ISO). A check digit can be generated by:
- Using the check digit tool. Information regarding the check digit tool is located at https://ffiec.cfpb.gov/tools/check-digit; or
- Applying the procedures provided in Appendix C to Regulation C.
Example:
- If, pursuant to the 2018 HMDA Rule, your institution is not reporting ULI, enter a NULI assigned to the covered loan or application. Your financial institution shall assign and report an identifier that:
- Is composed of up to 22 characters;
- May be letters, numerals, or a combination of letters and numerals;
- Must be unique within the insured depository institution or insured credit union; and
- Must not include any information that could be used to directly identify the applicant or borrower.
(2-4) Paragraph 4(a)(1)(ii) — Application Date.
Enter, in numeral form, the date the application was received or the date shown on the application form by year, month, and day, using YYYYMMDD format.
Example: If the application was received on July 21, 2023, enter 20230721.
a. Enter "NA" if the requirement to report application date is not applicable to the covered loan or application that your institution is reporting.
(2-5)Paragraph 4(a)(2) — Loan Type.
Indicate the type of covered loan or application by entering the applicable Code from the following:
Code 1—Conventional (not insured or guaranteed by FHA, VA, RHS, or FSA)
Code 2—Federal Housing Administration insured (FHA)
Code 3—Veterans Affairs guaranteed (VA)
Code 4—USDA Rural Housing Service or Farm Service Agency guaranteed (RHS or FSA)
(2-6) Paragraph 4(a)(3) — Loan Purpose.
Indicate the purpose of the covered loan or application by entering the applicable Code from the following:
Code 1—Home purchase
Code 2—Home improvement
Code 31—Refinancing
Code 32—Cash-out refinancing
Code 4—Other purpose
Code 5—Not applicable
(2-7) Paragraph 4(a)(4) — Preapproval.
Indicate whether the covered loan or application involved a request for a preapproval of a home purchase loan under a preapproval program by entering the applicable Code from the following:
Code 1—Preapproval requested
Code 2—Preapproval not requested
(2-8) Paragraph 4(a)(5) — Construction Method.
Indicate the construction method for the dwelling by entering the applicable Code from the following:
Code 1—Site-built
Code 2—Manufactured home
(2-9) Paragraph 4(a)(6) — Occupancy Type.
Indicate the occupancy type by entering the applicable Code from the following:
Code 1—Principal residence
Code 2—Second residence
Code 3—Investment property
(2-10) Paragraph 4(a)(7) — Loan Amount.
Enter, in dollars, the amount of the covered loan, or the amount applied for, as applicable.
Example: If the loan amount is $110,500, enter 110500 or 110500.00. If the loan amount is $110,500.24, enter 110500.24.
(2-11) Paragraph 4(a)(8)(i) — Action Taken.
Indicate the action taken on the covered loan or application by entering the applicable Code from the following:
Code 1—Loan originated
Code 2—Application approved but not accepted
Code 3—Application denied
Code 4—Application withdrawn by applicant
Code 5—File closed for incompleteness
Code 6—Purchased loan
Code 7—Preapproval request denied
Code 8—Preapproval request approved but not accepted
(2-12) Paragraph 4(a)(8)(ii) — Action Taken Date.
Enter, in numeral form, the date of action taken by year, month, and day, using YYYYMMDD format.
Example: If the action taken date is July 21, 2023, enter 20230721.
(2-13 to 2-18) Paragraph 4(a)(9) — Location of Property Securing (or Proposed to Secure) the Covered Loan.
Enter the location of the property securing the covered loan or, in the case of an application, proposed to secure the covered loan.
Property Address Securing (or Proposed to Secure) the Covered Loan.
Example:
- Street Address. Enter the street address of the property as one (1) data field. U.S. Postal Service Publication 28, Sub-Sections 231–239, can be used as a guide for formatting the street address to help improve geocoding accuracy. Address components include, as applicable, the following individual items:
- Primary Address Number
- Predirectional
- Street Name
- Prefix
- Suffix
- Postdirectional
- Secondary Address Identifier, such as apartment
- Secondary Address, such as apartment number
Example:
456 W Somewhere Ave Apt 201
- Primary Address Number: "456"
- Predirectional: "W"
- Street Name: "Somewhere"
- Suffix: "Ave"
- Secondary Address Identifier: "Apt"
- Secondary Address: "201"
-
City. Enter the city of the property as one (1) data field.
-
State. Enter the two-letter state code of the property as one (1) data field.
-
ZIP Code. Enter the ZIP code of the property as one (1) data field.
a. Non-Standard Addressing. U.S. Postal Service Publication 28, Sub-Section 24, 25, and 29, respectively, can be used as guides for formatting non-standard style addressing including rural route, Highway Contract Route, and Puerto Rico addresses to increase the accuracy for geocoding.
b. The following address formats are generally not preferred:
General Delivery addresses, such as General Delivery, Anytown, CA 90049-9998.
Post Office Box addresses, such as P.O. Box 100 Anytown, CA 90049-9998.
Spelled-out numbers, such as Four Hundred Fifty Six W Somewhere Ave Apt Two Hundred One.
c. Enter "NA" in each of the property address fields if the requirement to report property address is not applicable to the covered loan or application that your institution is reporting.
d. Enter "Exempt" in the Street Address, City and Zip Code fields if, pursuant to the 2018 HMDA Rule, your institution is not reporting Property Address.
- County. Enter the five-digit Federal Information Processing Standards (FIPS) numerical code for the county. Do not use commas.
Example: Enter 06037 for the FIPS code for Los Angeles County, CA.
a. Enter "NA" if the requirement to report county is not applicable to the covered loan or application that your institution is reporting.
- Census Tract. Enter the 11-digit census tract number as defined by the U.S. Census Bureau. Do not use decimals.
Example: Enter 06037264000 for a census tract within Los Angeles County, CA.
a. Enter "NA" if the requirement to report census tract is not applicable to the covered loan or application that your institution is reporting.
(2-19 to 2-57)Paragraph 4(a)(10) — Applicant or Borrower Information.
Appendix B to Regulation C contains instructions for the collection of data on ethnicity, race, and sex, and contains a sample data-collection form.
Paragraph 4(a)(10)(i) — Ethnicity, Race, and Sex.
Ethnicity of Applicant or Borrower.
- Ethnicity of Applicant or Borrower. Indicate the ethnicity of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, by entering up to five (5) of the applicable Codes from the following:
Code 1—Hispanic or Latino
Code 11—Mexican
Code 12—Puerto Rican
Code 13—Cuban
Code 14—Other Hispanic or Latino
Code 2—Not Hispanic or Latino
Code 3—Information not provided by applicant in mail, internet, or telephone application
Code 4—Not applicable
Code 5—No co-applicant
a. Do not enter the same code more than once for the applicant or borrower, or any co-applicant or co-borrower, as applicable, for any covered loan or application.
b. Use Code 3 if the applicant or borrower, or co-applicant or co-borrower, does not provide the information in an application taken by mail, internet, or telephone. Leave the remaining Ethnicity of Applicant or Borrower data fields blank.
c. Use Code 4 if the requirement to report the applicant's or borrower's ethnicity does not apply to the covered loan or application that your institution is reporting. Leave the remaining Ethnicity of Applicant or Borrower data fields blank.
d. Use Code 5 in the co-applicant field if there are no co-applicants or co-borrowers. Leave the remaining Ethnicity of Applicant or Borrower data fields blank.
i. If there is more than one co-applicant or co-borrower, provide the required information only for the first co-applicant or co-borrower listed on the collection form.
e. If fewer than five (5) ethnicities are provided by the applicant or borrower, or by any co-applicant or co-borrower, leave the remaining Ethnicity of Applicant or Borrower data fields blank.
f. If the applicant or borrower, or any co-applicant or co-borrower, did not select Code 14, but provided another Hispanic or Latino ethnicity(ies) in the Ethnicity Free Form Text Field for Other Hispanic or Latino, your institution is permitted, but not required, to report Code 14 in one of the Ethnicity of Applicant or Borrower data fields. This will be counted as one of the five (5) reported ethnicities, whether or not you also choose to report Code 14 as one of the Ethnicity of Applicant or Borrower, or Ethnicity of Co-Applicant or Co-Borrower, data fields.
-
Ethnicity Free Form Text Field for Other Hispanic or Latino. Enter the specific other Hispanic or Latino ethnicity(ies) not listed above, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. For example, enter Argentinean, Colombian, Dominican, Nicaraguan, Salvadoran, or Spaniard, and so on, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. Enter more than one other Hispanic or Latino ethnicity, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. The maximum number of characters for this field is 100 characters, including spaces. If the applicant or borrower, or any co-applicant or co-borrower, did not provide another Hispanic or Latino ethnicity(ies), leave this field blank.
-
Ethnicity Collected on the Basis of Visual Observation or Surname. Indicate whether the ethnicity of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname by entering the applicable Code from the following:
Code 1—Collected on the basis of visual observation or surname
Code 2—Not collected on the basis of visual observation or surname
Code 3—Not applicable
Code 4—No co-applicant
a. Use Code 3 if the requirement to report the applicant's or borrower's ethnicity does not apply to the covered loan or application that your institution is reporting.
b. Use Code 3 if the financial institution received the application prior to January 1st, 2018, and the financial institution chooses not to report whether the ethnicity of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname.
c. Use Code 4 in the co-applicant field if there are no co-applicants or co-borrowers.
i. If there is more than one co-applicant or co-borrower, provide the required information only for the first co-applicant or co-borrower listed on the collection form.
Race of Applicant or Borrower.
- Race of Applicant or Borrower. Indicate the race of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, by entering up to five (5) of the applicable Codes from the following:
Code 1—American Indian or Alaska Native
Code 2—Asian
Code 21—Asian Indian
Code 22—Chinese
Code 23—Filipino
Code 24—Japanese
Code 25—Korean
Code 26—Vietnamese
Code 27—Other Asian
Code 3—Black or African American
Code 4—Native Hawaiian or Other Pacific Islander
Code 41—Native Hawaiian
Code 42—Guamanian or Chamorro
Code 43—Samoan
Code 44—Other Pacific Islander
Code 5—White
Code 6—Information not provided by applicant in mail, internet, or telephone application
Code 7—Not applicable
Code 8—No co-applicant
a. Do not enter the same code more than once for the applicant or borrower, or any co-applicant or co-borrower, as applicable, for any covered loan or application.
b. Use Code 6 if the applicant or borrower, or co-applicant or co-borrower, does not provide the information in an application taken by mail, internet, or telephone. Leave the remaining Race of Applicant or Borrower data fields blank.
c. Use Code 7 if the requirement to report the applicant's or borrower's race does not apply to the covered loan or application that your institution is reporting. Leave the remaining Race of Applicant or Borrower data fields blank.
d. Use Code 8 in the co-applicant field if there are no co-applicants or co-borrowers. Leave the remaining Race of Applicant or Borrower data fields blank.
i. If there is more than one co-applicant or co-borrower, provide the required information only for the first co-applicant or co-borrower listed on the collection form.
e. If fewer than five (5) races are provided by the applicant or borrower, or by any co-applicant or co-borrower, leave the remaining Race of Applicant or Borrower data fields blank.
f. If the applicant or borrower, or any co-applicant or co-borrower, did not select Code(s) 1, 27, or 44, but provided the name of the applicant's or borrower's American Indian or Alaska Native Enrolled or Principal Tribe(s) in the Race Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe, other Asian race(s) in the Race Free Form Text Field for Other Asian, or Other Pacific Islander race(s) in the Race Free Form Text Field for Other Pacific Islander, your institution is permitted, but not required, to report Code 1, Code 27, or Code 44, as applicable, in one of the Race of Applicant or Borrower data fields. Each reported race will be counted as one of the five (5) reported races, whether or not you also choose to report Code 1, Code 27, or Code 44, as applicable as one of the Race of Applicant or Borrower, or Race of Co-Applicant or Co-Borrower, data fields.
-
Race Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe. Enter the name of the applicant's or borrower's American Indian or Alaska Native Enrolled or Principal Tribe(s), if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. For example, enter Navajo if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. Enter more than one American Indian or Alaska Native Enrolled or Principal Tribe, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. The maximum number of characters for this field is 100 characters, including spaces. If the applicant or borrower, or any co-applicant or co-borrower did not provide an American Indian or Alaska Native Enrolled or Principal Tribe(s), leave this field blank.
-
Race Free Form Text Field for Other Asian. Enter the specific Other Asian race(s) not listed above, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. For example, enter Hmong, Laotian, Thai, Pakistani, or Cambodian, and so on, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. Enter more than one other Asian race, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. The maximum number of characters for this field is 100 characters, including spaces. If the applicant or borrower, or any co-applicant or co-borrower, did not provide an Other Asian race(s), leave this field blank.
-
Race Free Form Text Field for Other Pacific Islander. Enter the specific Other Pacific Islander race(s) not listed above, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. For example, enter Fijian, or Tongan, and so on, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. Enter more than one Other Pacific Islander race, if provided by the applicant or borrower, or by any co-applicant or co-borrower, as applicable. The maximum number of characters for this field is 100 characters, including spaces. If the applicant or borrower, or any co-applicant or co-borrower, did not provide an Other Pacific Islander race(s), leave this field blank.
-
Race Collected on the Basis of Visual Observation or Surname. Indicate whether the race of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname by entering the applicable Code from the following:
Code 1—Collected on the basis of visual observation or surname
Code 2—Not collected on the basis of visual observation or surname
Code 3—Not applicable
Code 4—No co-applicant
a. Use Code 3 if the requirement to report the applicant's or borrower's race does not apply to the covered loan or application that your institution is reporting.
b. Use Code 3 if the financial institution received the application prior to January 1st, 2018, and the financial institution chooses not to report whether the race of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname.
c. Use Code 4 in the co-applicant field if there are no co-applicants or co-borrowers.
i. If there is more than one co-applicant or co-borrower, provide the required information only for the first co-applicant or co-borrower listed on the collection form.
- Sex of Applicant or Borrower. Indicate the sex of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, by entering the appropriate Code from the following:
Code 1—Male
Code 2—Female
Code 3—Information not provided by applicant in mail, internet, or telephone application
Code 4—Not applicable
Code 5—No co-applicant
Code 6—Applicant selected both male and female
a. Use Code 3 if the applicant or co-applicant does not provide the information in an application taken by mail, internet, or telephone.
b. Use Code 4 if the requirement to report the applicant's or borrower's sex does not apply to the covered loan or application that your institution is reporting.
c. Use Code 5 in the co-applicant field if there are no co-applicants or co-borrowers.
i. If there is more than one co-applicant or co-borrower, provide the required information only for the first co-applicant or co-borrower listed on the collection form.
d. Use Code 6 if the applicant or co-applicant selected both male and female.
- Sex Collected on the Basis of Visual Observation or Surname. Indicate whether the sex of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname by entering the applicable Code from the following:
Code 1—Collected on the basis of visual observation or surname
Code 2—Not collected on the basis of visual observation or surname
Code 3—Not applicable
Code 4—No co-applicant
a. Use Code 3 if the requirement to report the applicant's or borrower's sex does not apply to the covered loan or application that your institution is reporting.
b. Use Code 3 if the financial institution received the application prior to January 1st, 2018, and the financial institution chooses not to report whether the sex of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable, was collected on the basis of visual observation or surname.
c. Use Code 4 in the co-applicant field if there are no co-applicants or co-borrowers.
i. If there is more than one co-applicant or co-borrower, provide the required information only for the first co-applicant or co-borrower listed on the collection form.
Paragraph 4(a)(10)(ii) — Age of Applicant or Borrower.
Enter, in numeral form, the age, in years, of the applicant or borrower, or of the first co-applicant or co-borrower, as applicable. Age is calculated, as of the application date, as the number of whole years derived from the date of birth shown on the application form. Or enter the applicable Code from the following:
Code 8888—Not applicable
Code 9999—No co-applicant
Example: If the applicant or borrower is 24 years old, enter 24.
a. Use Code 8888 if the requirement to report the applicant's or borrower's age does not apply to the covered loan or application that your institution is reporting.
b. Use Code 9999 in the co-applicant field if there are no co-applicants or co-borrowers.
i. If there is more than one co-applicant or co-borrower, provide the required information only for the first co-applicant or co-borrower listed on the collection form.
Paragraph 4(a)(10)(iii) — Income.
Enter, in dollars, rounded to the nearest thousand, the gross annual income relied on in making the credit decision, or if a credit decision was not made, the gross annual income relied on in processing the application (round $500 up to the next $1,000). The HMDA Platform can accept negative numbers for Income.
Example: If the income amount is $35,500, enter 36. If the income amount is $50,000, enter 50.
a. Enter "NA" if the requirement to report gross annual income does not apply to the covered loan or application that your institution is reporting.
(2-58)Paragraph 4(a)(11) — Type of Purchaser.
Indicate the type of entity purchasing a covered loan from your institution within the same calendar year that your institution originated or purchased the loan by entering the applicable Code from the following:
Code 0—Not applicable
Code 1—Fannie Mae
Code 2—Ginnie Mae
Code 3—Freddie Mac
Code 4—Farmer Mac
Code 5—Private securitizer
Code 6—Commercial bank, savings bank, or savings association
Code 71—Credit union, mortgage company, or finance company
Code 72—Life insurance company
Code 8—Affiliate institution
Code 9—Other type of purchaser
a. Use Code 0 if the requirement to report the type of purchaser does not apply to the covered loan that your institution is reporting.
(2-59)Paragraph 4(a)(12) — Rate Spread.
Enter, as a percentage, to at least three (3) decimal places, the difference between the covered loan's annual percentage rate (APR) and the average prime offer rate (APOR) for a comparable transaction as of the date the interest rate is set. Numbers calculated to beyond three (3) decimal places may either be reported beyond three (3) decimal places, up to 15 decimal places, or rounded or truncated to three (3) decimal places. Decimal place trailing zeros may either be included or omitted. The HMDA Platform can accept negative numbers for Rate Spread.
a. If the APR exceeds the APOR, enter a positive number.
Example:
If the APR is 3.678% and the APOR is 3.25%, enter 0.428.
If the APR is 4.560% and the APOR is 4.25%, enter either 0.31 or 0.310
b. If the APR is less than the APOR, enter a negative number.
Example:
If the APR 3.1235% and the APOR is 3.25%, enter -0.1265. Alternatively, the rate spread may be truncated to -0.126 or rounded to -0.127.
c. Enter "NA" if the requirement to report rate spread does not apply to the covered loan or application that your institution is reporting.
d. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Rate Spread.
(2-60)Paragraph 4(a)(13) — HOEPA Status.
Indicate whether the covered loan is a high-cost mortgage under Regulation Z, 12 CFR 1026.32(a) by entering the applicable Code from the following:
Code 1—High-cost mortgage
Code 2—Not a high-cost mortgage
Code 3—Not applicable
a. Use Code 3 if the requirement to report HOEPA status does not apply to the covered loan that your institution is reporting.
(2-61)Paragraph 4(a)(14) — Lien Status.
Indicate the lien status of the property securing the covered loan, or in the case of an application, proposed to secure the covered loan, by entering the applicable Code from the following:
Code 1—Secured by a first lien
Code 2—Secured by a subordinate lien
(2-62 to 2-67)Paragraph 4(a)(15) — Credit Score of Applicant or Borrower.
- Credit Score of Applicant or Borrower. Enter, in numeral form, the credit score, or scores relied on in making the credit decision for the applicant or borrower, or of the first co-applicant or co-borrower, as applicable. If Regulation C requires your institution to report a single score that corresponds to multiple applicants or borrowers, report the score in either the applicant field or the co-applicant field. Or, enter the applicable Code from the following:
Code 7777—Credit score is not a number
Code 8888—Not applicable
Code 9999—No co-applicant
Code 1111—Exempt
Example: If the credit score is 650, enter 650.
a. Use Code 8888 if the requirement to report the credit score does not apply to the covered loan or application that your institution is reporting.
i. If Regulation C requires your institution to report a single score for a covered loan or application involving multiple applicants or borrowers, either report the credit score in the applicant field and use Code 8888 in the co-applicant field or report the credit score in the co-applicant field and use Code 8888 in the applicant field.
b. Use Code 9999 in the co-applicant field if there are no co-applicants or co-borrowers.
c. Use Code 7777 if your institution relied on a credit score that is not a number (e.g., a credit score of "Meets Threshold"). Code 7777 should not be used if a credit scoring model that produces numeric credit scores returns a result stating that the credit score could not be determined.
d. Enter "1111" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Credit Score.
- Name and Version of Credit Scoring Model. Indicate the name and version of the credit scoring model used to generate the credit score, or scores, relied on in making the credit decision by entering the applicable Code from the following:
Code 1—Equifax Beacon 5.0
Code 2—Experian Fair Isaac Risk Model v2
Code 3—TransUnion FICO Risk Score Classic 04
Code 4—TransUnion FICO Risk Score Classic 98
Code 5—VantageScore 2.0
Code 6—VantageScore 3.0
Code 7—More than one credit scoring model
Code 8—Other credit scoring model
Code 9—Not applicable
Code 10—No co-applicant
Code 11—FICO Score 9
Code 12-FICO Score 8
Code 13-FICO Score 10
Code 14-FICO Score 10T
Code 15-VantageScore 4.0
Code 1111—Exempt
a. Use Code 1 for Equifax Beacon 5.0, which may also be known as FICO Score 5.
b. Use Code 2 for Experian Fair/Isaac Risk Model v2, which may also be known as FICO Score 2 or FICO Classic v2.
c. Use Code 3 for TransUnion FICO Risk Score Classic 04, which may also be known as FICO Score 4 or TU-04.
d. Use Code 4 for TransUnion FICO Risk Score Classic 98, which may also be known as FICO 98 or TU-98.
e. Use Code 9 if the requirement to report the name and version of the credit scoring model does not apply to the covered loan or application that your institution is reporting.
i. If Regulation C requires your institution to report a single score for a covered loan or application involving multiple applicants or borrowers, either report the name and version of the credit scoring model, or that multiple credit scoring models were used, in the applicant field, and use Code 9 in the co-applicant field; or report the name and version of the credit scoring model, or that multiple credit scoring models were used, in the co-applicant field and use Code 9 in the applicant field.
f. Use Code 10 in the co-applicant field if there are no co-applicants or co-borrowers.
g. Use Code 11 for FICO Score 9, which also may be known as FICO 9.
h. Use Code 12 for FICO Score 8, which also may be known as FICO 8.
i. Use Code 13 for FICO Score 10, which also may be known as FICO 10.
j. Use Code 14 for FICO Score 10T, which also may be known as FICO 10T.
k. Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Credit Score.
- Name and Version of Credit Scoring Model Conditional Free Form Text Field for Code 8. If Code 8 is selected in the Name and Version of Credit Scoring Model Field, enter the specific other credit scoring model that is not listed above. The maximum number of characters for this field is 100 characters, including spaces. If 8 is not entered, leave this field blank.
(2-68 to 2-72) Paragraph 4(a)(16) — Reason for Denial.
- Reason for Denial. Indicate the principal reason, or reasons, for denial by entering up to four (4) applicable Codes from the following:
Code 1—Debt-to-income ratio
Code 2—Employment history
Code 3—Credit history
Code 4—Collateral
Code 5—Insufficient cash (downpayment, closing costs)
Code 6—Unverifiable information
Code 7—Credit application incomplete
Code 8—Mortgage insurance denied
Code 9—Other
Code 10—Not applicable
Code 1111—Exempt
a. Do not enter the same code more than once for any covered loan or application.
b. Use Code 10 if the requirement to report reasons for denial does not apply to the covered loan or application that your institution is reporting. Leave the remaining Reason for Denial data fields blank.
c. Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Reason for Denial. Leave the remaining Reason for Denial data fields blank.
d. If there are fewer than four principal (4) reasons for denial, leave the remaining Reason for Denial data fields blank.
e. If your institution uses the model form contained in Appendix C to Regulation B, 12 CFR part 1002 (Form C–1, Sample Notice of Action Taken and Statement of Reasons), use the foregoing Codes as follows:
Code 1—Income insufficient for amount of credit requested, and Excessive obligations in relation to income
Code 2—Temporary or irregular employment, and Length of employment
Code 3—Insufficient number of credit references provided; Unacceptable type of credit references provided; No credit file; Limited credit experience; Poor credit performance with us; Delinquent past or present credit obligations with others; Number of recent inquiries on credit bureau report; Garnishment, attachment, foreclosure, repossession, collection action, or judgment; and Bankruptcy
Code 4—Value or type of collateral not sufficient
Code 6—Unable to verify credit references; Unable to verify employment; Unable to verify income; and Unable to verify residence
Code 7—Credit application incomplete
Code 9—Length of residence; Temporary residence; and Other reasons specified on the adverse action notice.
- Reason for Denial Conditional Free Form Text Field for Code 9. If Code 9 is selected in any Reason for Denial field, enter the specific other reason(s) for denial not listed above. The maximum number of characters for this field is 255 characters, including spaces. If 9 is not entered, leave this field blank.
(2-73 to 2-74)Paragraph 4(a)(17) — Total Loan Costs or Total Points and Fees.
Enter either Total Loan Costs or Total Points and Fees or indicate that neither reporting requirement applies by entering "NA" for both.
Paragraph 4(a)(17)(i) — Total Loan Costs.
Enter, in dollars, the amount of total loan costs. If the amount is zero, enter 0.
Example: If the total loan costs are $2,399.04, enter 2399.04.
a. Enter "NA" if the requirement to report total loan costs does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Total Loan Costs or Total Points and Fees.
Paragraph 4(a)(17)(ii) — Total Points and Fees.
Enter, in dollars, the total points and fees charged in connection with the covered loan. If the amount is zero, enter 0.
Example: If the total points and fees are $2,399.04, enter 2399.04.
c. Enter "NA" if the requirement to report total points and fees does not apply to the covered loan or application that your institution is reporting.
d. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Total Loan Costs or Total Points and Fees.
(2-75)Paragraph 4(a)(18) — Origination Charges.
Enter, in dollars, the total of all itemized amounts that are designated borrower-paid at or before closing. If the total is zero, enter 0.
Example: If the origination charges are $2,399.04, enter 2399.04.
a. Enter "NA" if the requirement to report origination charges does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Total Loan Costs or Total Points and Fees.
(2-76)Paragraph 4(a)(19) — Discount Points.
Enter, in dollars, the points paid to the creditor to reduce the interest rate. If no points were paid, leave this field blank.
Example: If the amount paid for discount points is $2,399.04, enter 2399.04.
a. Enter "NA" if the requirement to report discount points does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Discount Points.
(2-77)Paragraph 4(a)(20) — Lender Credits.
Enter, in dollars, the amount of lender credits. If no lender credits were provided, leave this field blank.
Example: If the amount is $1500.24, enter 1500.24.
a. Enter "NA" if the requirement to report lender credits does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Lender Credits.
(2-78)Paragraph 4(a)(21) — Interest Rate.
Enter, as a percentage, to at least three (3) decimal places, the interest rate. Numbers calculated to beyond three (3) decimal places may either be reported beyond three (3) decimal places or rounded or truncated to three (3) decimal places. Decimal place trailing zeros may either be included or omitted. The HMDA Platform can accept up to 15 decimal places for the Interest Rate.
Example: If the interest rate is 4.125%, enter 4.125.
If the interest rate is exactly 4.500%, enter 4.5, 4.50, or 4.500.
a. Enter "NA" if the requirement to report interest rate does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Interest Rate.
c. Enter 0 if the interest rate is 0.
(2-79)Paragraph 4(a)(22) — Prepayment Penalty Term.
Enter, in numeral form, the term, in months, of any prepayment penalty.
Example: If a prepayment penalty may be imposed within the first 24 months after closing or account opening, enter 24.
a. Enter "NA" if the requirement to report prepayment penalty term does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Prepayment Penalty Term.
(2-80)Paragraph 4(a)(23) — Debt-to-Income Ratio.
Enter, as a percentage, the ratio of the applicant's or borrower's total monthly debt to the total monthly income relied on in making the credit decision. Use decimal places only if the ratio relied upon uses decimal places. The HMDA Platform can accept up to 15 decimal places and can accept negative numbers for Debt-to-Income Ratio.
Example: If the relied upon debt-to-income ratio is 42.95, enter 42.95, and not 43.
If, however, your institution rounded the ratio up to 43% and relied on the rounded-up number, enter 43.
a. Enter "NA" if the requirement to report debt-to-income ratio does not apply to the covered loan or application that your institution is reporting. b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Debt-to-Income Ratio.
(2-81)Paragraph 4(a)(24) — Combined Loan-to-Value Ratio.
Enter, as a percentage, the ratio of the total amount of debt secured by the property to the value of the property relied on in making the credit decision. Use decimal places only if the ratio relied upon uses decimal places. The HMDA Platform can accept up to 15 decimal places for the Combined Loan-to-Value Ratio.
Example: If the relied upon combined loan-to-value ratio is 80.05, enter 80.05, and not 80.
If, however, your institution rounded the ratio down to 80 and relied on the rounded-down number, enter 80.
a. Enter "NA" if the requirement to report combined loan-to-value ratio does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Combined Loan-to-Value Ratio.
(2-82)Paragraph 4(a)(25) — Loan Term.
Enter, in numeral form, the number of months after which the legal obligation will mature or terminate, or would have matured or terminated.
Example: If the loan term is 360 months, enter 360.
a. Enter "NA" if the requirement to report loan term does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Loan Term.
(2-83)Paragraph 4(a)(26) — Introductory Rate Period.
Enter, in numeral form, the number of months, or proposed number of months in the case of an application, until the first date the interest rate may change after closing or account opening.
Example: If the introductory rate period is 24 months, enter 24.
a. Enter "NA" if the requirement to report introductory rate period does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Introductory Rate Period.
(2-84)Paragraph 4(a)(27)(i) — Balloon Payment.
Indicate whether the contractual terms include, or would have included, a balloon payment by entering the applicable Code from the following:
Code 1—Balloon payment
Code 2—No balloon payment
Code 1111—Exempt
Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Balloon Payment.
(2-85) Paragraph 4(a)(27)(ii) — Interest-Only Payments.
Indicate whether the contractual terms include, or would have included, interest-only payments by entering the applicable Code from the following:
Code 1—Interest-only payments
Code 2—No interest-only payments
Code 1111—Exempt
Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Interest-Only Payments.
(2-86) Paragraph 4(a)(27)(iii) — Negative Amortization.
Indicate whether the contractual terms include, or would have included, a term that would cause the covered loan to be a negative amortization loan by entering the applicable Code from the following:
Code 1111—Exempt
Code 1—Negative amortization
Code 2—No negative amortization
Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Negative Amortization.
(2-87)Paragraph 4(a)(27)(iv) — Other Non-Amortizing Features.
Indicate whether the contractual terms include, or would have included, any term, other than those described in Paragraphs 1003.4(a)(27)(i), (ii), and (iii) that would allow for payments other than fully amortizing payments during the loan term by entering the applicable Code from the following:
Code 1111—Exempt
Code 1—Other non-fully amortizing features
Code 2—No other non-fully amortizing features
Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Other Non-Amortizing Features.
(2-88)Paragraph 4(a)(28) — Property Value.
Enter, in dollars, the value of the property securing the covered loan or, in the case of an application, proposed to secure the covered loan, relied on in making the credit decision.
Example: If the property value is $350,500, enter 350500.
a. Enter "NA" if the requirement to report property value does not apply to the covered loan or application that your institution is reporting.
b. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Property Value.
(2-89)Paragraph 4(a)(29) — Manufactured Home Secured Property Type
Indicate whether the covered loan or application is, or would have been, secured by a manufactured home and land, or by a manufactured home and not land, by entering the applicable Code from the following:
Code 1111—Exempt
Code 1—Manufactured home and land
Code 2—Manufactured home and not land
Code 3—Not applicable
a. Use Code 3 if the requirement to report manufactured home secured property type does not apply to the covered loan or application that your institution is reporting.
b. Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Manufactured Home Secured Property Type.
(2-90) Paragraph 4(a)(30) — Manufactured Home Land Property Interest.
Indicate the applicant's or borrower's land property interest in the land on which a manufactured home is, or will be, located by entering the applicable Code from the following:
Code 1111—Exempt
Code 1—Direct ownership
Code 2—Indirect ownership
Code 3—Paid leasehold
Code 4—Unpaid leasehold
Code 5—Not applicable
a. Use Code 5 if the requirement to report manufactured home land property interest does not apply to the covered loan or application that your institution is reporting.
b. Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Manufactured Home Land Property Interest.
(2-91)Paragraph 4(a)(31) — Total Units.
Enter, in numeral form, the number of individual dwelling units related to the property securing the covered loan or, in the case of an application, proposed to secure the covered loan.
Example: If there are five (5) individual dwelling units, enter 5. 4.
(2-92)Paragraph 4(a)(32) — Multifamily Affordable Units.
Enter, in numeral form, the number of individual dwelling units related to any multifamily dwelling property securing the covered loan or, in the case of an application, proposed to secure the covered loan, that are income-restricted pursuant to Federal, State, or local affordable housing programs.
Example: If there are five (5) multifamily affordable units, enter 5.
a. Enter "0" for a covered loan or application related to a multifamily dwelling that does not contain any such income-restricted individual dwelling units.
b. Enter "NA" if the requirement to report multifamily affordable units does not apply to the covered loan or application that your institution is reporting.
c. Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting Multifamily Affordable Units.
(2-93 to 2-94)Paragraph 4(a)(33) — Application Channel.
- Submission of Application. Indicate whether the applicant or borrower submitted the application directly to your institution by entering the applicable Code from the following:
Code 1—Submitted directly to your institution
Code 2—Not submitted directly to your institution
Code 3—Not applicable
Code 1111—Exempt
a. Use Code 3 if the requirement to report whether the applicant or borrower submitted the application directly to your institution does not apply to the covered loan or application that your institution is reporting.
b. Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Submission of Application.
- Initially Payable to Your Institution. Indicate whether the obligation arising from the covered loan was, or, in the case of an application, would have been, initially payable to your institution by entering the applicable Code from the following:
Code 1—Initially payable to your institution
Code 2—Not initially payable to your institution
Code 3—Not applicable
Code 1111—Exempt
a. Use Code 3 if the requirement to report whether the obligation arising from the covered loan was, or, in the case of an application, would have been, initially payable to your institution does not apply to the covered loan or application that your institution is reporting.
b. Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Initially Payable to Your Institution.
(2-95)Paragraph 4(a)(34) — Mortgage Loan Originator NMLSR Identifier.
Enter the Nationwide Mortgage Licensing System and Registry mortgage loan originator unique identifier (NMLSR ID) for the mortgage loan originator, NA, or Exempt. The NMLSR ID should not include zeros that are not part of the NMLSR ID (e.g., if the NMLSR ID is 64573, it should be entered as 64573, not 00064573). The HMDA Platform can accept a value with, at most, nine integers (e.g., 214748364).
Example: If the NMLSR ID for the mortgage loan originator is 123450, enter 123450.
Enter "Exempt" if, pursuant to the 2018 HMDA Rule, your institution is not reporting NMLSR ID. 11.
(2-96 to 2-107) Paragraph 4(a)(35) — Automated Underwriting System (AUS) and Result.
- Automated Underwriting System. Indicate the automated underwriting system(s) (AUS) used by your institution to evaluate the application by entering up to five (5) of the applicable Codes from the following:
Code 1—Desktop Underwriter (DU)
Code 2—Loan Prospector (LP) or Loan Product Advisor
Code 3—Technology Open to Approved Lenders (TOTAL) Scorecard
Code 4—Guaranteed Underwriting System (GUS)
Code 5—Other
Code 6—Not applicable
Code 7—Internal Proprietary System
Code 1111—Exempt
a. If fewer than five (5) automated underwriting systems were used by your institution to evaluate the application, leave the remaining Automated Underwriting System data fields blank.
b. Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Automated Underwriting System.
c. Use Code 5 if your institution uses an Automated Underwriting System that 1) is not listed in the enumerated Automated Underwriting Systems, and 2) is not an internal proprietary system. Enter the name of the Automated Underwriting System in the Automated Underwriting System Conditional Free Form Text Field for Code 5 data field.
d. Use Code 6 if the requirement to report an AUS does not apply to the covered loan or application that your institution is reporting. Leave the remaining Automated Underwriting System data fields blank.
e. Use Code 7 if your institution uses an Automated Underwriting System that 1) is not listed in the enumerated Automated Underwriting Systems, and 2) is an internal proprietary system.
f. If your institution uses an Automated Underwriting System that is already listed as a valid value for Automated Underwriting Systems and is not Code 5 - Other (i.e., Codes 1, 2, 3, etc.), do not enter the name of Automated Underwriting System into the Automated Underwriting System Conditional Free Form Text Field for Code 5 data field. Instead, choose the corresponding code for your input. For example, the Automated Underwriting System Desktop Underwriter (DU) should be coded as 1, and not submitted in the free form text field as "Desktop Underwriter (DU)". Instead, enter the applicable code(s) in the Automated Underwriting System fields.
-
Automated Underwriting System Conditional Free Form Text Field for Code 5. If Code 5 is selected in any Automated Underwriting System field, enter the name of the specific other AUS(s) not listed above. Enter more than one other Automated Underwriting System, as applicable. The maximum number of characters for this field is 255 characters, including spaces. If 5 is not entered, leave this field blank.
-
Automated Underwriting System Result. Indicate the result(s) generated by the automated underwriting system (AUS) previously indicated by entering the applicable Code(s) from the following:
Code 1—Approve/Eligible
Code 2—Approve/Ineligible
Code 3—Refer/Eligible
Code 4—Refer/Ineligible
Code 5—Refer with Caution
Code 6—Out of Scope
Code 7—Error
Code 8—Accept
Code 9—Caution
Code 10—Ineligible
Code 11—Incomplete
Code 12—Invalid
Code 13—Refer
Code 14—Eligible
Code 15—Unable to Determine or Unknown
Code 16—Other
Code 17—Not applicable
Code 18 – Accept/Eligible
Code 19 – Accept/Ineligible
Code 20 – Accept/Unable to Determine
Code 21 – Refer with Caution/Eligible
Code 22 – Refer with Caution/Ineligible
Code 23 – Refer/Unable to Determine
Code 24 - Refer with Caution/Unable to Determine
Code 1111—Exempt
a. The AUS of the Federal National Mortgage Association (Fannie Mae) commonly returns results that correspond to Codes 1, 2, 3, 4, 5, 6, 7, and 15. If your result(s) differ, report the AUS result(s) received.
b. The AUS of the Federal Home Loan Mortgage Corporation (Freddie Mac) commonly returns results that correspond to Codes 8, 9, 10, 11, 12, and 13. If more than one result is returned on the Feedback Certificate, report the Risk Class result. If your result(s) differ, report the AUS result(s) received.
c. The FHA TOTAL Scorecard AUS commonly returns results that correspond to Codes 1, 2, 3, 4, 8, 13, 18, and 19. If your results differ, report the AUS result(s) received.
d. The GUS AUS commonly returns results that correspond to Codes 3, 4, 10, 15, 18, 19, 20, 21, 22, 23 and 24. If your result(s) differ, report the AUS result(s) received.
e. Use Code 17 if the requirement to report an AUS result does not apply to the covered loan or application that your institution is reporting. Leave the remaining Automated Underwriting System Result data fields blank.
f. If fewer than five (5) results were generated by the automated underwriting system(s) previously indicated, leave the remaining Automated Underwriting System Result data fields blank.
g. Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Automated Underwriting System Result.
h. If your institution uses an Automated Underwriting System Result value that is listed in the Automated Underwriting System Results and is not Code 16 - Other (i.e., Codes 1, 2, 3, etc.), do not enter this value into the Automated Underwriting System Result Conditional Free Form Text Field for Code 16 data field. For example, an Automated Underwriting System Result of Accept/Eligible should be coded as 18, and not listed as "Accept/Eligible" in the free form text field. Instead, enter the applicable code(s) in the for Automated Underwriting System Result fields.
- Automated Underwriting System Result Conditional Free Form Text Field for Code 16. If Code 16 is selected in an Automated Underwriting System Result field, enter the specific other AUS result(s) not listed above. Enter more than one other Automated Underwriting System Result, as applicable. The maximum number of characters for this field is 255 characters, including spaces. If 16 is not entered, leave this field blank.
(2-108)Paragraph 4(a)(36) — Reverse Mortgage.
Indicate whether the covered loan is, or the application is for, a reverse mortgage by entering the applicable Code from the following:
Code 1111—Exempt
Code 1—Reverse mortgage
Code 2—Not a reverse mortgage
Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Reverse Mortgage.
(2-109)Paragraph 4(a)(37) — Open-End Line of Credit.
Indicate whether the covered loan is, or the application is for, an open-end line of credit by entering the applicable Code from the following:
Code 1—Open-end line of credit
Code 2—Not an open-end line of credit
Code 1111—Exempt
Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Open End Line of Credit.
(2-110)Paragraph 4(a)(38) — Business or Commercial Purpose.
Indicate whether the covered loan is, or the application is for a covered loan that will be made, primarily for a business or commercial purpose by entering the applicable Code from the following:
Code 1—Primarily for a business or commercial purpose
Code 2—Not primarily for a business or commercial purpose
Code 1111—Exempt
Use Code 1111 if, pursuant to the 2018 HMDA Rule, your institution is not reporting Business or Commercial Purpose.
5. 2024 Edit Specifications
5.1 Introduction
HMDA edits are rules to assist filers in checking the accuracy of HMDA data prior to submission. There are four types of edits:
-
Syntactical: Edits that check whether the loan/application register is in the correct format and whether the data covers the correct filing year. A syntactical edit occurs, for example, if none of the rows in the loan/application register begin with the number two (2) to indicate that the following data fields contain information relating to the reported loan or application. The loan/application register cannot be submitted until the filer corrects all syntactical edit errors and re-uploads the updated loan/application register to the HMDA Platform.
-
Validity : Edits that check whether there are valid values in each data field. A validity edit occurs, for example, if the contact person’s telephone number does not follow the format “999-999-9999.” The loan/application register cannot be submitted until the filer corrects all validity edit errors and re-uploads the updated loan/application register to the HMDA Platform.
-
Quality: Edits that check whether entries in the individual data fields or combinations of data fields conform to expected values. A quality edit occurs, for example, if the reported Tax Identification Number does not match the Tax Identification Number the institution reported on the previous year’s loan/application register. The loan/application register cannot be submitted until the filer either confirms the accuracy of all values flagged by quality edits in the HMDA Platform or corrects the flagged values and re-uploads the updated loan/application register to the HMDA Platform.
-
Macro Quality:Edits that check whether the submitted loan/application register as a whole conforms to expected values. A macro quality edit occurs, for example, if the reported percentage of multifamily loans exceeds 10% of the loan/application register entries. The loan/application register cannot be submitted until the filer either confirms 95 the accuracy of all the values flagged by the macro quality edits in the HMDA Platform or corrects the flagged values and re-uploads the updated loan/application register to the HMDA Platform.
5.2 2024 New and Revised Edits
TABLE 3: 2024 EDITS REVISED FROM 2023
Table 3 | |||
---|---|---|---|
Type of Data Field | Edit Number | Data Point | Modification |
Loan/Application Register | V660 | Credit Score | Updated edit to include the added credit scoring models 12, 13, 14 and 15. |
Loan/Application Register | V662 | Credit Score | Updated edit to include the added credit scoring models 12, 13, 14 and 15. |
Loan/Application Register | V665 | Credit Score | Updated edit to include the added credit scoring models 12, 13, 14 and 15. |
Loan/Application Register | V667 | Credit Score | Updated edit to include the added credit scoring models 12, 13, 14 and 15. |
Loan/Application Register | V720 | Credit Score | Updated edit to include the added credit scoring models 12, 13, 14 and 15. |
Loan/Application Register | Q660 | Property Location | New edit that prevents filers from inputting a street address that exceeds 100 characters. Also, prevents filers from reporting multiple street addresses in a single field. |
5.3 2024 Edits
Table 4 through Table 8 list all of the edits for HMDA data collected in 2023 under the HMDA Final Rule. Each table groups the edits by type and whether the edit is related to the data fields in the “Filing Institution, Reporting Period, and Contact Information (Transmittal Sheet)” section or the “Loan/Application Register” section. Edits for data collected in 2023 are grouped by data point and may contain more than one condition that must be true for the edit to pass during filing. Conditions within the edit description are distinguished with a number. To increase clarity, the tables contain a column specifying each data field that affects the overall edit, and the edit descriptions contain all data field names in italics.
TABLE 4: SYNTACTICAL AND VALIDITY EDITS FOR FILING INSTITUTION, REPORTING PERIOD, AND CONTACT INFORMATION (TRANSMITTAL SHEET), AND LOAN/APPLICATION REGISTER
Table 4 | |||
---|---|---|---|
Edit ID | Data Point Name | Affected Data Fields | Edit Description |
N/A | Record Identifier | The data provided in the file is incorrect. Please review the information below and update your file accordingly. The following criteria must be met: 1) The first row of your file must begin with a 1; and 2) Any subsequent rows must begin with a 2. | |
Legal Entity Identifier (LEI) | Legal Entity Identifier (LEI) | The LEI in this row does not match the reported LEIin the transmittal sheet (the first row of your file). Please update your file accordingly. | |
Legal Entity Identifier (LEI) | Legal Entity Identifier (LEI) | An LEI in an invalid format was provided. Please review the information below and update your file accordingly. 1) The required format for LEI is alphanumeric with 20 characters, and it cannot be left blank. |
TABLE 5: SYNTACTICAL AND VALIDITY EDITS FOR FILING INSTITUTION, REPORTING PERIOD, AND CONTACT INFORMATION (TRANSMITTAL SHEET)
Table 5 | ||
---|---|---|
Edit ID | Data Field Name(s) | Edit Description |
Calendar Year | The reported Calendar Year does not match the filing year indicated at the start of the filing. Please confirm the information below and update your file accordingly. 1) The correct file has been uploaded; and 2) The correct filing year was chosen at the start of the filing; and 3) The calendar year is listed correctly in the file. | |
Federal Agency; Federal Taxpayer Identification Number; Legal Entity Identifier (LEI) | The reported Federal Agency; Federal Taxpayer Identification Number ; and Legal Entity Identifier must match the Federal Agency ; Federal Taxpayer Identification Number; and Legal Entity Identifier for the financial institution for which you are filing. Please confirm the information below and update your file accordingly. 1) The correct financial institution was at the start of the filing; and 2) The correct file was uploaded; and 3) The Federal Agency, Federal Taxpayer Identification Number, and Legal Entity Identifier are reported correctly in the file. | |
Total Number of Entries Contained in Submission | The reported Total Number of Entries Contained in Submission does not match the total number of LAR records in the HMDA file. Please update your file accordingly to ensure that your file contains the correct number of entries . | |
Financial Institution Name; Contact Person's Name; Contact Person's E-mail Address; Contact Person's Office Street Address; Contact Person's Office City | The following data fields are required, and cannot be left blank. A blank value(s) was provided. Please review the information below and update your file accordingly. 1) Financial Institution Name; 2) Contact Person's Name; 3) Contact Person's E-mail Address; 4) Contact Person's Office Street Address; 5) Contact Person's Office City | |
Calendar Quarter | An invalid Calendar Quarter was reported. Please review the information below and update your file accordingly. 1) Calendar Quarter must equal 4, and cannot be left blank. | |
Contact Person's Telephone Number | An invalid Contact Person's Telephone Number was provided. Please review the information below and update your file accordingly. 1) The required format for the Contact Person's Telephone Number is 999-999-9999, and it cannot be left blank. | |
Contact Person's Office State | An invalid Contact Person's Office State was provided. Please review the information below and update your file accordingly. 1) Contact Person's Office State must be a two-letter state code, and cannot be left blank. | |
Contact Person's Office ZIP Code | An invalid Contact Person's ZIP Code was provided. Please review the information below and update your file accordingly. 1) The required format for the Contact Person's ZIP Code is 12345-1010 or 12345, and it cannot be left blank. | |
Total Number of Entries Contained in Submission | The reported Total Number of Entries Contained in Submission is not in the valid format. Please review the information below and update your file accordingly. 1) The required format for the Total Number of Entries Contained in Submission is a whole number that is greater than zero, and it cannot be left blank. | |
Federal Taxpayer Identification Number | An invalid Federal Taxpayer Identification Number was provided. Please review the information below and update your file accordingly. 1) The required format for the Federal Taxpayer Identification Number is 99-9999999, and it cannot be left blank. | |
Contact Person's Email Address | An invalid Contact Person's Email Addresswas provided. Please review the information below and update your file accordingly. 1) The required format for the Contact Person's Email Address is name@example.com, and it cannot be left blank. | |
Financial Institution Name; LEI | An invalid Financial Institution Name was reported. Please review the information below and update your file accordingly: 1) The required format for Financial Institution Name is alphanumeric. The Financial Institution Name field contains only numbers and no letters. 2) The Financial Institution Name provided matches the LEI provided. Please update the Financial Institution Name . |
TABLE 6: SYNTACTICAL AND VALIDITY EDITS FOR LOAN/APPLICATION REGISTER
Table 6 | |||
---|---|---|---|
Edit ID | Data Point Name | Affected Data Fields | Edit Description |
Applicable to all data fields | All data fields in the LAR | A duplicate transaction has been reported. Please review and update your file accordingly. | |
Universal Loan Identifier (ULI) | Universal Loan Identifier (ULI) | A duplicate ULI has been reported. Please review and update your file accordingly. 1) If Action Taken equals 1, a duplicate ULI cannot be reported. | |
Universal Loan Identifier (ULI) or Non-Universal Loan Identifier (NULI) | Universal Loan Identifier (ULI) Universal Loan Identifier (NULI) | A ULI with an invalid format was provided. Please review the information below and update your file accordingly. 1) The required format for ULI is alphanumeric with at least 23 characters and up to 45 characters, and it cannot be left blank. 2) The required format for NULI is alphanumeric with at least 1 character and no more than 22 characters, and it cannot be NA, Exempt, 1111 or left blank. | |
Universal Loan Identifier (ULI) | Universal Loan Identifier (ULI) | An invalid ULI was reported. Please review the information below and update your file accordingly. 1) Based on the check digit calculation, the ULI contains a transcription error. | |
Application Date | Application Date; Action Taken | An invalid data field was reported. Please review the information below and update your file accordingly. 1) Application Date must be either a valid date using YYYYMMDD format or NA, and cannot be left blank. 2) If Action Taken equals 6, then Application Date must be NA, and the reverse must be true. | |
Loan Type | Loan Type | An invalid Loan Type was reported. Please review the information below and update your file accordingly. 1) Loan Type must equal 1, 2, 3, or 4, and cannot be left blank. | |
Loan Purpose | Loan Purpose; Preapproval | An invalid Loan Purpose was reported. Please review the information below and update your file accordingly. 1) Loan Purpose must equal 1, 2, 31, 32, 4, or 5, and cannot be left blank. 2) If Preapproval equals 1, then Loan Purpose must equal 1. | |
Preapproval | Preapproval; Action Taken | An invalid Preapproval data field was provided. Please review the information below and update your file accordingly. 1) Preapproval must equal 1 or 2, and cannot be left blank. 2) If Action Taken equals 7 or 8, then Preapproval must equal 1. 3) If Action Taken equals 3, 4, 5, or 6, then Preapproval must equal 2. 4) If Preapproval equals 1, then Action Taken must equal 1, 2, 7, or 8. | |
Preapproval | Preapproval; Loan Purpose; Multifamily Affordable Units; Reverse Mortgage; Open-End Line of Credit | An invalid Preapproval was provided. Please review the information below and update your file accordingly. 1) If Loan Purpose equals 2, 4, 31, 32, or 5, then Preapproval must equal 2. 2) If Multifamily Affordable Units is a number, then Preapproval must equal 2. 3) If Reverse Mortgage equals 1, then Preapproval must equal 2. 4) If Open-End Line of Credit equals 1, then Preapproval must equal 2. | |
Construction Method | Construction Method; Manufactured Home Land Property Interest; Manufactured Home Secured Property Type | An invalid Construction Method was reported. Please review the information below and update your file accordingly. 1) Construction Method must equal 1 or 2, and cannot be left blank. 2) If Manufactured Home Land Property Interest equals 1, 2, 3, or 4, then Construction Method must equal 2. 3) If Manufactured Home Secured Property Type equals 1 or 2 then Construction Method must equal 2. | |
Occupancy Type | Occupancy Type | An invalid Occupancy Type was reported. Please review the information below and update your file accordingly. 1) Occupancy Type must equal 1, 2, or 3, and cannot be left blank. | |
Loan Amount | Loan Amount | An invalid Loan Amount was reported. Please review the information below and update your file accordingly. 1) Loan Amount must be a number greater than or equal to 0, and cannot be left blank. | |
Action Taken | Action Taken | An invalid Action Taken was reported. Please review the information below and update your file accordingly. 1) Action Taken must equal 1, 2, 3, 4, 5, 6, 7, or 8, and cannot be left blank. | |
Action Taken Date | Action Taken Date; Application Date | An invalid Action Taken Date was reported. Please review the information below and update your file accordingly. 1) Action Taken Date must be a valid date using YYYYMMDD format, and cannot be left blank. 2) The Action Taken Datemust be in the reporting year. 3) If Action Taken equals 1, 2, 3, 4, 5, 7, or 8, then the Action Taken Datemust be on or after the Application Date. | |
Property Address | Street Address | An invalid Street Address was provided. Please review the information below and update your file accordingly. 1) Street Address cannot be left blank. | |
Property Address | City | An invalid City was provided. Please review the information below and update your file accordingly. 1) Citycannot be left blank. | |
Property Address | Street Address; City; State; Zip Code | An invalid City, State, and/or Zip Code were provided. Please review the information below and update your file accordingly. 1) If Street Address was not reported NA or Exempt, then City, State, and Zip Code must be provided, and not reported NA. | |
Property Address; Property Location | State | An invalid State was provided. Please review the information below and update your file accordingly. 1) State must be either a two-letter state code or NA, and cannot be left blank. | |
Property Address | Zip Code | An invalid Zip Code was provided. Please review the information below and update your file accordingly. 1) The required format for Zip Code is 12345-1010, 12345, NA, or Exempt, and cannot be left blank. | |
Property Location | Census Tract | An invalid Census Tract was provided. Please review the information below and update your file accordingly. 1) The required format for Census Tract is an eleven-digit number or NA, and it cannot be left blank. 2) If Census Tract is not reported NA, then the number provided must be a valid census tract number defined by the U.S. Census Bureau. | |
Property Location | County | An invalid County was provided. Please review the information below and update your file accordingly. 1) The required format for County is a five-digit FIPS code or NA, and it cannot be left blank | |
Property Location | Census Tract; County | An invalid Census Tract or County was provided. Please review the information below and update your file accordingly. 1 If Countyand Census Tractare not reported NA, theymust be a valid combination of information. The first five digits of theCensus Tractmust match the reported five-digit County FIPS code. | |
Ethnicity | Ethnicity of Applicant or Borrower: 1; Ethnicity of Applicant or Borrower: 2; Ethnicity of Applicant or Borrower: 3; Ethnicity of Applicant or Borrower: 4; Ethnicity of Applicant or Borrower: 5; Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino | An invalid Ethnicity data field was reported. Please review the information below and update your file accordingly. 1) Ethnicity of Applicant or Borrower: 1 must equal 1, 11, 12, 13, 14, 2, 3, or 4, and cannot be left blank, unless an ethnicity is provided in Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino . 2) Ethnicity of Applicant or Borrower: 2; Ethnicity of Applicant or Borrower: 3; Ethnicity of Applicant or Borrower: 4; Ethnicity of Applicant or Borrower: 5 must equal 1, 11, 12, 13, 14, 2, or be left blank. 3) Each Ethnicity of Applicant or Borrower code can only be reported once. 4) If Ethnicity of Applicant or Borrower: 1 equals 3 or 4; then Ethnicity of Applicant or Borrower: 2; Ethnicity of Applicant or Borrower: 3;Ethnicity of Applicant or Borrower: 4; Ethnicity of Applicant or Borrower: 5 must be left blank. | |
Ethnicity | Ethnicity of Applicant or Borrower: 1; Ethnicity of Applicant or Borrower: 2; Ethnicity of Applicant or Borrower: 3; Ethnicity of Applicant or Borrower: 4; Ethnicity of Applicant or Borrower: 5; Ethnicity of Applicant or Borrower Collected on the Basis of Visual Observation or Surname; Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino. | An invalid Ethnicity data field was reported. Please review the information below and update your file accordingly. 1) Ethnicity of Applicant or Borrower Collected on the Basis of Visual Observation or Surname must equal 1, 2, or 3, and cannot be left blank. 2) If Ethnicity of Applicant or Borrower Collected on the Basis of Visual Observation or Surname equals 1, then Ethnicity of Applicant or Borrower: 1 must equal 1 or 2; and Ethnicity of Applicant or Borrower: 2 must equal 1, 2 or be left blank;and Ethnicity of Applicant or Borrower: 3 ; Ethnicity of Applicant or Borrower: 4; and Ethnicity of Applicant or Borrower: 5 must all be left blank. 3) If Ethnicity of Applicant or Borrower Collected on the Basis of Visual Observation or Surname equals 2, then Ethnicity of Applicant or Borrower: 1 must equal 1, 11, 12, 13, 14, 2, or 3, and cannot be left blank, unless an ethnicity is provided in Ethnicity of Applicant or Borrower: Free Form Text Field for Other Hispanic or Latino . | |
Ethnicity | Ethnicity of Applicant or Borrower: 1; Ethnicity of Applicant or Borrower Collected on the Basis of Visual Observation or Surname | An invalid Ethnicity data field was reported. Please review the information below and update your file accordingly. 1) If Ethnicity of Applicant or Borrower: 1 equals 4, then Ethnicity of Applicant or Borrower Collected on the Basis of Visual Observation or Surname must equal 3. | |
Ethnicity | Ethnicity of Co-Applicant or Co-Borrower: 1; Ethnicity of Co-Applicant or Co-Borrower: 2; Ethnicity of Co-Applicant or Co-Borrower: 3; Ethnicity of Co-Applicant or Co-Borrower: 4; Ethnicity of Co-Applicant or Co-Borrower: 5; Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino. | An invalid Ethnicity data field was reported. Please review the information below and update your file accordingly. 1) Ethnicity of Co-Applicant or Co-Borrower: 1 must equal 1, 11, 12, 13, 14, 2, 3, 4, or 5, and cannot be left blank, unless an ethnicity is provided in Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino . 2) Ethnicity of Co-Applicant or Co-Borrower: 2; Ethnicity of Co-Applicant or Co-Borrower: 3; Ethnicity of Co-Applicant or Co-Borrower: 4 ; Ethnicity of Co-Applicant or Co-Borrower: 5 must equal 1, 11, 12, 13, 14, 2, or be left blank. 3) Each Ethnicity of Co-Applicant or Co-Borrower code can only be reported once. 4) If Ethnicity of Co-Applicant or Co-Borrower: 1 equals 3, 4, or 5; then Ethnicity of Co-Applicant or Co-Borrower: 2; Ethnicity of Co-Applicant or Co-Borrower: 3 ; Ethnicity of Co-Applicant or Co-Borrower: 4; Ethnicity of Co-Applicant or Co-Borrower: 5 must be left blank. | |
Ethnicity | Ethnicity of Co-Applicant or Co-Borrower: 1; Ethnicity of Co-Applicant or Co-Borrower: 2; Ethnicity of Co-Applicant or Co-Borrower: 3; Ethnicity of Co-Applicant or Co-Borrower: 4; Ethnicity of Co-Applicant or Co-Borrower: 5; Ethnicity of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname; Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino | An invalid Ethnicity data field was reported. Please review the information below and update your file accordingly. 1) Ethnicity of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname must equal 1, 2, 3, or 4, and cannot be left blank. 2) If Ethnicity of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname equals 1 ; then Ethnicity of Co-Applicant or Co-Borrower: 1 must equal 1 or 2; and Ethnicity of Co-Applicant or Co-Borrower: 2 must equal 1, 2 or be left blank;and Ethnicity of Co-Applicant or Co-Borrower: 3; Ethnicity of Co-Applicant or Co-Borrower: 4; Ethnicity of Co-Applicant or Co-Borrower: 5 must all be left blank. 3) If Ethnicity of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname equals 2 ; then Ethnicity of Co-Applicant or Co-Borrower: 1 must equal 1, 11, 12, 13, 14, 2, or 3, and cannot be left blank, unless an ethnicity is provided in Ethnicity of Co-Applicant or Co-Borrower: Free Form Text Field for Other Hispanic or Latino. | |
Ethnicity | Ethnicity of Co-Applicant or Co-Borrower: 1; Ethnicity of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | An invalid Ethnicity data field was reported. Please review the information below and update your file accordingly. 1) If Ethnicity of Co-Applicant or Co-Borrower: 1 equals 4, then Ethnicity of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname must equal 3. | |
Ethnicity | Ethnicity of Co-Applicant or Co-Borrower: 1; Ethnicity of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | An invalid Ethnicity data field was reported. Please review the information below and update your file accordingly. 1) If Ethnicity of Co-Applicant or Co-Borrower: 1 equals 5, then Ethnicity of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname must equal 4, and the reverse must be true. | |
Race | Race of Applicant or Borrower: 1; Race of Applicant or Borrower: 2; Race of Applicant or Borrower: 3; Race of Applicant or Borrower: 4; Race of Applicant or Borrower: 5; Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe;Race of Applicant or Borrower: Free Form Text Field for Other Asian; Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander | An invalid Race data field was reported. Please review the information below and update your file accordingly. 1) Race of Applicant or Borrower: 1must equal 1, 2, 21, 22, 23, 24, 25, 26, 27, 3, 4, 41, 42, 43, 44, 5, 6, or 7, and cannot be left blank, unless a race is provided in Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe , Race of Applicant or Borrower: Free Form Text Field for Other Asian, or Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander. 2) Race of Applicant or Borrower: 2; Race of Applicant or Borrower: 3 ; Race of Applicant or Borrower: 4; Race of Applicant or Borrower: 5 must equal 1, 2, 21, 22, 23, 24, 25, 26, 27, 3, 4, 41, 42, 43, 44, 5, or be left blank. 3) Each Race of Applicant or Borrower code can only be reported once. 4) If Race of Applicant or Borrower: 1 equals 6 or 7; then Race of Applicant or Borrower: 2; Race of Applicant or Borrower: 3;Race of Applicant or Borrower: 4; and Race of Applicant or Borrower: 5 must all be left blank. | |
Race | Race of Applicant or Borrower: 1; Race of Applicant or Borrower: 2; Race of Applicant or Borrower: 3; Race of Applicant or Borrower: 4; Race of Applicant or Borrower: 5; Race of Applicant or Borrower Collected on the Basis of Visual Observation or Surname; Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe; Race of Applicant or Borrower: Free Form Text Field for Other Asian; Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander | An invalid Race data field was reported. Please review the information below and update your file accordingly. 1) Race of Applicant or Borrower Collected on the Basis of Visual Observation or Surname must equal 1, 2, or 3, and cannot be left blank. 2) If R ace of Applicant or Borrower Collected on the Basis of Visual Observation or Surname equals 1; then Race of Applicant or Borrower: 1 must equal 1, 2, 3, 4, or 5, and Race of Applicant or Borrower: 2; Race of Applicant or Borrower: 3; Race of Applicant or Borrower: 4; Race of Applicant or Borrower: 5 must equal 1, 2, 3, 4, or 5, or be left blank. 3) If Race of Applicant or Borrower Collected on the Basis of Visual Observation or Surname equals 2, Race of Applicant or Borrower: 1 must equal 1, 2, 21, 22, 23, 24, 25, 26, 27, 3, 4, 41, 42, 43, 44, 5, or 6, and cannot be left blank, unless a race is provided in Race of Applicant or Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe , Race of Applicant or Borrower: Free Form Text Field for Other Asian, or Race of Applicant or Borrower: Free Form Text Field for Other Pacific Islander ; and Race of Applicant or Borrower: 2; Race of Applicant or Borrower: 3; Race of Applicant or Borrower: 4; Race of Applicant or Borrower: 5 must equal 1, 2, 21, 22, 23, 24, 25, 26, 27, 3, 4, 41, 42, 43, 44, 5, or be left blank. | |
Race | Race of Applicant or Borrower: 1; Race of Applicant or Borrower Collected on the Basis of Visual Observation or Surname | An invalid Race data field was reported. Please review the information below and update your file accordingly. 1) If Race of Applicant or Borrower: 1 equals 7, then Race of Applicant or Borrower Collected on the Basis of Visual Observation or Surname must equal 3. | |
Race | Race of Co-Applicant or Co-Borrower: 1; Race of Co-Applicant or Co-Borrower: 2; Race of Co-Applicant or Co-Borrower: 3; Race of Co-Applicant or Co-Borrower: 4; Race of Co-Applicant or Co-Borrower: 5; Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe; Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian; Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander | An invalid Race data field was reported. Please review the information below and update your file accordingly. 1) Race of Co-Applicant or Co-Borrower: 1 must equal 1, 2, 21, 22, 23, 24, 25, 26, 27, 3, 4, 41, 42, 43, 44, 5, 6, 7, or 8, and cannot be left blank, unless a race is provided in Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe , Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian, or Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander. 2) Race of Co-Applicant or Co-Borrower: 2; Race of Co-Applicant or Co-Borrower: 3; Race of Co-Applicant or Co-Borrower: 4; Race of Co-Applicant or Co-Borrower: 5 must equal 1, 2, 21, 22, 23, 24, 25, 26, 27, 3, 4, 41, 42, 43, 44, 5, or be left blank. 3) Each Race of Co-Applicant or Co-Borrower code can only be reported once. 4) If Race of Co-Applicant or Co-Borrower: 1 equals 6, 7, or 8, then Race of Co-Applicant or Co-Borrower: 2 ;Race of Co-Applicant or Co-Borrower: 3;Race of Co-Applicant or Co-Borrower: 4;and Race of Co-Applicant or Co-Borrower: 5 must be left blank. | |
Race | Race of Co-Applicant or Co-Borrower: 1; Race of Co-Applicant or Co-Borrower: 2; Race of Co-Applicant or Co-Borrower: 3; Race of Co-Applicant or Co-Borrower: 4; Race of Co-Applicant or Co-Borrower: 5; Race of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname; Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe; Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian; Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander | An invalid Race data field was reported. Please review the information below and update your file accordingly. 1) Race of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname must equal 1, 2, 3, or 4, and cannot be left blank. 2) If Race of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname equals 1, then Race of Co-Applicant or Co-Borrower: 1 must equal 1, 2, 3, 4, or 5; and Race of Co-Applicant or Co-Borrower: 2; Race of Co-Applicant or Co-Borrower: 3; Race of Co-Applicant or Co-Borrower: 4; Race of Co-Applicant or Co-Borrower: 5 must equal 1, 2, 3, 4, or 5, or be left blank. 3) If Race of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname equals 2, then Race of Co-Applicant or Co-Borrower: 1 must equal 1, 2, 21, 22, 23, 24, 25, 26, 27, 3, 4, 41, 42, 43, 44, 5, or 6, and cannot be left blank, unless a race is provided in Race of Co-Applicant or Co-Borrower: Free Form Text Field for American Indian or Alaska Native Enrolled or Principal Tribe , Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Asian, or Race of Co-Applicant or Co-Borrower: Free Form Text Field for Other Pacific Islander ; and Race of Co-Applicant or Co-Borrower: 2; Race of Co-Applicant or Co-Borrower: 3; Race of Co-Applicant or Co-Borrower: 4; Race of Co-Applicant or Co-Borrower: 5 must equal 1, 2, 21, 22, 23, 24, 25, 26, 27, 3, 4, 41, 42, 43, 44, 5, or be left blank. | |
Race | Race of Co-Applicant or Co-Borrower: 1; Race of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | An invalid Race data field was reported. Please review the information below and update your file accordingly. 1) If Race of Co-Applicant or Co-Borrower: 1 equals 7, then Race of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname must equal 3. | |
Race | Race of Co-Applicant or Co-Borrower: 1; Race of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | An invalid Race data field was reported. Please review the information below and update your file accordingly. 1) If Race of Co-Applicant or Co-Borrower: 1 equals 8, then Race of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname must equal 4, and the reverse must be true. | |
Sex | Sex of Applicant or Borrower; Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname | An invalid Sex data field was reported. Please review the information below and update your file accordingly. 1) Sex of Applicant or Borrower must equal 1, 2, 3, 4, or 6, and cannot be left blank. 2) Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname must equal 1, 2, or 3, and cannot be left blank. | |
Sex | Sex of Applicant or Borrower; Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname | An invalid Sex data fieldwas reported. Please review the information below and update your file accordingly. 1) If Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname equals 1, then Sex of Applicant or Borrower must equal 1 or 2. | |
Sex | Sex of Applicant or Borrower; Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname | An invalid Sex data field was reported. Please review the information below and update your file accordingly. 1) If Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname equals 2, then Sex of Applicant or Borrower must equal 1, 2, 3, or 6. 2) If Sex of Applicant or Borrowerequals 6, then Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname must equal 2 or 3. | |
Sex | Sex of Applicant or Borrower; Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname | An invalid Sex data field was reported. Please review the information below and update your file accordingly. 1) If Sex of Applicant or Borrower equals 4, then Sex of Applicant or Borrower Collected on the Basis of Visual Observation or Surname must equal 3. | |
Sex | Sex of Co-Applicant or Co-Borrower; Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | An invalid Sex data field was reported. Please review the information below and update your file accordingly. 1) Sex of Co-Applicant or Co-Borrower must equal 1, 2, 3, 4, 5, or 6, and cannot be left blank. 2) Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname must equal 1, 2, 3, or 4, and cannot be left blank. | |
Sex | Sex of Co-Applicant or Co-Borrower; Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | An invalid Sex data field was reported. Please review the information below and update your file accordingly. 1) If Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname equals 1, then Sex of Co-Applicant or Co-Borrower must equal 1 or 2. | |
Sex | Sex of Co-Applicant or Co-Borrower; Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | An invalid Sex data field was reported. Please review the information below and update your file accordingly. 1) If S ex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname equals 2, then Sex of Co-Applicant or Co-Borrower must equal 1, 2, 3, or 6. 2) If Sex of Co-Applicant or Co-Borrower equals 6, then Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname must equal 2 or 3. | |
Sex | Sex of Co-Applicant or Co-Borrower; Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | An invalid Sex data field was reported. Please review the information below and update your file accordingly. 1) If Sex of Co-Applicant or Co-Borrower equals 4, then Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname must equal 3. | |
Sex | Sex of Co-Applicant or Co-Borrower; Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname | An invalid Sex data field was reported. Please review the information below and update your file accordingly. 1) If Sex of Co-Applicant or Co-Borrower Collected on the Basis of Visual Observation or Surname equals 4, then Sex of Co-Applicant or Co-Borrower must equal 5, and the reverse must be true. | |
Age | Age of Applicant or Borrower; Ethnicity of Applicant or Borrower 1; Race of Applicant or Borrower 1; Sex of Applicant or Borrower | An invalid Age of Applicant or Borrower was reported. Please review the information below and update your file accordingly. 1) Age of Applicant or Borrower must be a whole number greater than zero, and cannot be left blank. 2) If the Ethnicity of Applicant or Borrower: 1 equals 4; and Race of Applicant or Borrower: 1 equals 7; Sex of Applicant or Borrower equals 4; and Action Taken does not equal 6, indicating the applicant or borrower is a non-natural person, then Age of Applicant or Borrower must equal 8888. | |
Age | Age of Co-Applicant or Co-Borrower; Ethnicity of Co-Applicant or Co-Borrower 1; Race of Co-Applicant or Co-Borrower 1; Sex of Co-Applicant or Co-Borrower | An invalid Age of Co-Applicant or Co-Borrower was reported. Please review the information below and update your file accordingly. 1) Age of Co-Applicant or Co-Borrower must be a whole number greater than zero, and cannot be left blank. 2) If the Ethnicity of Co-Applicant or Co-Borrower: 1 equals 4; and Race of Co-Applicant or Co-Borrower: 1 equals 7 ; and Sex of Co-Applicant or Co-Borrower: 1 equals 4; and Action Taken does not equal 6, indicating that the co-applicant or co-borrower is a non-natural person, then Age of Co-Applicant or Co-Borrower must equal 8888. | |
Income | Income; Multifamily Affordable Units | An invalid Income was reported. Please review the information below and update your file accordingly. 1) Income must be either a positive or negative integer rounded to the nearest thousand or NA, and cannot be left blank. 2) If Multifamily Affordable Units is a number, then Income must be NA. | |
Income | Income; Ethnicity of Applicant or Borrower: 1; Race of Applicant or Borrower: 1; Sex of Applicant or Borrower: 1; Ethnicity of Co-Applicant or Co-Borrower: 1; Race of Co-Applicant or Co-Borrower: 1; Sex of Co-Applicant or Co-Borrower: 1 | An invalid Income was reported. Please review the information below and update your file accordingly. 1) If Ethnicity of Applicant or Borrower: 1 equals 4; and Race of Applicant or Borrower: 1 equals 7; Sex of Applicant or Borrower: 1 equals 4; and Action Taken does not equal 6, indicating the applicant is a non-natural person, then Income must be NA. 2) If Ethnicity of Co-Applicant or Co-Borrower: 1 equals 4; and Race of Co-Applicant or Co-Borrower: 1 equals 7; Sex of Co-Applicant or Co-Borrower: 1 equals 4; and Action Taken does not equal 6, indicating that the co-applicant or co-borrower is a non-natural person, then Income must be NA. | |
Type of Purchaser | Type of Purchaser; Action Taken | An invalid Type of Purchaser was reported. Please review the information below and update your file accordingly. 1) Type of Purchaser must equal 0, 1, 2, 3, 4, 5, 6, 71, 72, 8, or 9, and cannot be left blank. 2) If Action Taken equals 2, 3, 4, 5, 7, or 8, then Type of Purchaser must equal 0. | |
Rate Spread | Rate Spread; Action Taken; Reverse Mortgage | An invalid Rate Spread was reported. Please review the information below and update your file accordingly. 1) Rate Spread must be a number, Exempt, or NA, and cannot be left blank. 2) If Action Taken equals 3, 4, 5, 6, or 7, then Rate Spread must be NA or Exempt. 3) If Reverse Mortgage equals 1, then Rate Spread must be NA or Exempt. | |
HOEPA Status | HOEPA Status; Action Taken | An invalid HOEPA Status was reported. Please review the information below and update your file accordingly. 1) HOEPA Status must equal 1, 2, or 3, and cannot be left blank. 2) If Action Taken equals 2, 3, 4, 5, 7, or 8, then HOEPA Status must be 3. | |
Lien Status | Lien Status | An invalid Lien Status was reported. Please review the information below and update your file accordingly. 1) Lien Status must equal 1 or 2, and cannot be left blank. | |
Credit Score | Credit Score of Applicant or Borrower; Applicant or Borrower, Name and Version of Credit Scoring Model | An invalid Credit Score data field was reported. Please review the information below and update your file accordingly. 1) Credit Score of Applicant or Borrower must be a number, and cannot be left blank. 2) Applicant or Borrower, Name and Version of Credit Scoring Model must equal 1111, 1, 2, 3, 4, 5, 6, 7, 8, 9, 11, 12, 13, 14 or 15. | |
Credit Score | Credit Score of Applicant or Borrower; Applicant or Borrower, Name and Version of Credit Scoring Model | An invalid Credit Score data field was reported. Please review the information below and update your file accordingly. 1) If Credit Score of Applicant or Borrower equals 8888, indicating not applicable, then Applicant or Borrower, Name and Version of Credit Scoring Model must equal 9, and the reverse must be true. | |
Credit Score | Applicant or Borrower, Name and Version of Credit Scoring Model; Applicant or Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 | An invalid Credit Score data field was reported. Please review the information below and update your file accordingly. 1) If Applicant or Borrower, Name and Version of Credit Scoring Model equals 1111, 1, 2, 3, 4, 5, 6, 7, 9,11, 12, 13, 14 or 15, then Applicant or Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 must be left blank, and the reverse must be true. 2) If Applicant or Borrower, Name and Version of Credit Scoring Model equals 8, then Applicant or Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 must not be blank, and the reverse must be true. | |
Credit Score | Action Taken; Credit Score of Applicant or Borrower; Applicant or Borrower, Name and Version of Credit Scoring Model; Applicant or Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 | An invalid Credit Score data field was reported. Please review the information below and update your file accordingly. 1) If Action Taken equals 4, 5, or 6, then Credit Score of Applicant or Borrower must equal 8888 or 1111; and Applicant or Borrower, Name and Version of Credit Scoring Model must equal 9 or 1111; and Applicant or Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 must be left blank. | |
Credit Score | Action Taken; Credit Score of Co-Applicant or Co-Borrower: Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model; Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 | An invalid Credit Score data field was reported. Please review the information below and update your file accordingly. 1) If Action Taken equals 4, 5, or 6, then Credit Score of Co-Applicant or Co-Borrower must equal 8888 or 1111; and Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model must equal 9 or 1111; and Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 must be left blank | |
Credit Score | Credit Score of Co-Applicant or Co-Borrower; Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model | An invalid Credit Score data field was reported. Please review the information below and update your file accordingly. 1) Credit Score of Co-Applicant or Co-Borrower must be a number, and cannot be left blank. 2) Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model must equal 1111, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10,11, 12, 13, 14 or 15 and cannot be left blank. | |
Credit Score | Credit Score of Co-Applicant or Co-Borrower; Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model | An invalid Credit Score data field was reported. Please review the information below and update your file accordingly. 1) If Credit Score of Co-Applicant or Co-Borrower equals 8888, indicating not applicable, then Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model must equal 9, and the reverse must be true. 2) If Credit Score of Co-Applicant or Co-Borrower equals 9999 indicating no co-applicant, then Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model must equal 10, and the reverse must be true. | |
Credit Score | Co-Applicant or Co-Borrower,Name and Version of Credit Scoring Model; Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 | An invalid Credit Score data field was reported. Please review the information below and update your file accordingly. 1) If Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model equals 1111, 1, 2, 3, 4, 5, 6, 7, 9, 10,11, 12, 13, 14, or 15 then Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 must be left blank, and the reverse must be true. 2) If Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model equals 8, then Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 must not be left blank, and the reverse must be true. | |
Credit Score | Credit Score of Applicant or Borrower; Credit Score of Co-Applicant or Co-Borrower; Ethnicity of Applicant or Borrower 1; Race of Applicant or Borrower 1; Sex of Applicant or Borrower; Ethnicity of Co-Applicant or Co-Borrower 1; Race of Co-Applicant or Co-Borrower 1; Sex of Co-Applicant or Co-Borrower | An invalid Credit Score data point was reported. Please review the information below and update your file accordingly. 1) If Ethnicity of Applicant or Borrower: 1 equals 4; and Race of Applicant or Borrower: 1 equals 7; and Sex of Applicant or Borrower equals 4 indicating the applicant is a non-natural person then Credit Score of Applicant or Borrower must equal 8888, indicating not applicable, or 1111. 2) If E thnicity of Co-Applicant or Co-Borrower: 1 equals 4; and Race of Co-Applicant or Co-Borrower: 1 equals 7; and Sex of Co-Applicant or Co-Borrower equals 4 indicating that the co-applicant is a non-natural person, then Credit Score of Co-Applicant or Co-Borrower must equal 8888, indicating not applicable, or 1111. | |
Reason for Denial | Reason for Denial: 1; Reason for Denial: 2; Reason for Denial: 3; Reason for Denial: 4 | An invalid Reason for Denial data field was reported. Please review the information below and update your file accordingly. 1) Reason for Denial: 1 must equal 1111, 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10, and cannot be left blank. 2) Reason for Denial: 2; Reason for Denial: 3 ; and Reason for Denial: 4 must equal 1, 2, 3, 4, 5, 6, 7, 8, 9, or be left blank. 3) Each Reason for Denial code can only be reported once. 4) If Reason for Denial: 1 equals 1111 or 10, then Reason for Denial: 2; Reason for Denial: 3; and Reason for Denial: 4 must all be left blank. | |
Reason for Denial | Action Taken; Reason for Denial: 1 | An invalid Reason for Denial data field was reported. Please review the information below and update your file accordingly. 1) If Action Taken equals 3 or 7, then the Reason for Denial: 1 must equal 1111, 1, 2, 3, 4, 5, 6, 7, 8, or 9. 2) If Reason for Denial: 1 equals 1, 2, 3, 4, 5, 6, 7, 8, or 9, then Action Taken must equal 3 or 7. 2) If Action Taken equals 1, 2, 4, 5, 6, or 8, then Reason for Denial: 1 must equal 1111 or 10. 4) If Reason for Denial: 1 equals 10, then Action Taken must equal 1, 2, 4, 5, 6, or 8. | |
Reason for Denial | Reason for Denial: 1; Reason for Denial: 2; Reason for Denial: 3; Reason for Denial: 4; Reason for Denial: Conditional Free Form Text Field for Code 9 | An invalid Reason for Denial data field was reported. Please review the information below and update your file accordingly. 1) Reason for Denial: 1; Reason for Denial: 2 ; Reason for Denial: 3; or Reason for Denial: 4 was reported Code 9: Other; however, the Reason for Denial: Conditional Free Form Text Field for Code 9 was left blank; or 2) The Reason for Denial: Conditional Free Form Text Field for Code 9 was reported, but Code 9 was not reported in Reason for Denial: 1; Reason for Denial: 2; Reason for Denial: 3; or Reason for Denial: 4. | |
Total Loan Costs or Total Points and Fees | Total Loan Costs; Total Points and Fees; Action Taken; Reverse Mortgage; Open-End Line of Credit; Business or Commercial Purpose | An invalid Total Loan Costs or Total Points and Fees data field was reported. Please review the information below and update your file accordingly. 1) Total Loan Costs must be a number greater than or equal to 0, NA, or Exempt, and cannot be left blank. 2) If Total Points and Fees is a number greater than or equal to 0, then Total Loan Costs must be NA. 3) If Reverse Mortgage equals 1, then Total Loan Costs must be NA or Exempt. 4) If Open-End Line of Credit equals 1, then Total Loan Costs must be NA or Exempt. 5) If Business or Commercial Purpose equals 1, then Total Loan Costs must be NA or Exempt. 6) If Action Taken equals 2, 3, 4, 5, 7, or 8, then Total Loan Costs must be NA or Exempt. | |
Total Loan Costs or Total Points and Fees | Total Points and Fees; Action Taken; Reverse Mortgage; Business or Commercial Purpose | An invalid Total Points and Fees was reported. Please review the information below and update your file accordingly. 1) Total Points and Fees must be a number greater than or equal to 0, Exempt, or NA, and cannot be left blank. 2) If Action Taken equals 2, 3, 4, 5, 6, 7, or 8 then Total Points and Fees must be NA or Exempt. 3) If Reverse Mortgage equals 1, then Total Points and Fees must be NA or Exempt. 4) If Business or Commercial Purpose equals 1, then Total Points and Fees must be NA or Exempt. 5) If Total Loan Costs is a number greater than or equal to 0, then Total Points and Fees must be NA. | |
Origination Charges | Origination Charges; Reverse Mortgage; Open-End Line of Credit; Business or Commercial Purpose; Action Taken | An invalid Origination Charges was reported. Please review the information below and update your file accordingly. 1) Origination Charges must be a number greater than or equal to 0, Exempt, or NA, and cannot be left blank. 2) If Reverse Mortgage equals 1, then Origination Charges must be NA or Exempt. 3) If Open-End Line of Credit equals 1, then Origination Charges must be NA or Exempt. 4) If Business or Commercial Purpose equals 1, then Origination Charges must be NA or Exempt. 5) If Action Taken equals 2, 3, 4, 5, 7, or 8, then Origination Charges must be NA or Exempt. | |
Discount Points | Discount Points; Reverse Mortgage; Open-End Line of Credit; Business or Commercial Purpose; Action Taken | An invalid Discount Points was reported. Please review the information below and update your file accordingly. 1) Discount Points must be a number greater than 0, blank, Exempt, or NA. 2) If Reverse Mortgage equals 1, then Discount Points must be NA or Exempt. 3) If Open-End Line of Credit equals 1, then Discount Points must be NA or Exempt. 4) If Business or Commercial Purpose equals 1, then Discount Points must be NA or Exempt. 5) If Action Taken equals 2, 3, 4, 5, 7, or 8, then Discount Points must be NA or Exempt. | |
Lender Credits | Lender Credits; Reverse Mortgage; Open-End Line of Credit; Business or Commercial Purpose; Action Taken | An invalid Lender Credits was reported. Please review the information below and update your file accordingly. 1) Lender Credits must be a number greater than 0, blank, Exempt, or NA. 2) If Reverse Mortgage equals 1, then Lender Credits must be NA or Exempt. 3) If Open-End Line of Credit equals 1, then Lender Credits must be NA or Exempt. 4) If Business or Commercial Purpose equals 1, then Lender Credits must be NA or Exempt. 5) If Action Taken equals 2, 3, 4, 5, 7, or 8, then Lender Credits must be NA or Exempt. | |
Interest Rate | Interest Rate; Action Taken | An invalid Interest Rate was reported. Please review the information below and update your file accordingly. 1) Interest Rate must be a number greater than or equal to 0, Exempt, or NA, and cannot be left blank. 2) If Action Taken equals 3, 4, 5, or 7; then Interest Rate must be NA or Exempt. | |
Prepayment Penalty Term | Prepayment Penalty Term; Action Taken; Reverse Mortgage; Business or Commercial Purpose; Loan Term | An invalid Prepayment Penalty Term was reported. Please review the information below and update your file accordingly. 1) Prepayment Penalty Term must be a whole number greater than 0, Exempt, or NA, and cannot be left blank. 2) If Action Taken equals 6, then Prepayment Penalty Term must be NA or Exempt. 3) If Reverse Mortgage equals 1, then Prepayment Penalty Term must be NA or Exempt. 4) If Business or Commercial Purpose equals 1, then Prepayment Penalty Term must be NA or Exempt. 5) If both Prepayment Penalty Term and Loan Term are numbers, then Prepayment Penalty Term must be less than or equal to Loan Term. | |
Debt-to-Income Ratio | Debt-to-Income Ratio, Multifamily Affordable Units, Action Taken | An invalid Debt-to-Income Ratio was reported. Please review the information below and update your file accordingly. 1) Debt-to-Income Ratio must be a number, Exempt, or NA, and cannot be left blank. 2) If Action Taken equals 4, 5, or 6, then Debt-to-Income Ratio must be NA or Exempt. 3) If Multifamily Affordable Units is a number, then Debt-to-Income Ratio must be NA or Exempt. | |
Debt-to-Income Ratio | Debt-to-Income Ratio; Ethnicity of Applicant or Borrower: 1; Race of Applicant or Borrower: 1; Sex of Applicant or Borrower: 1; Ethnicity of Co-Applicant or Co-Borrower: 1; Race of Co-Applicant or Co-Borrower: 1; Sex of Co-Applicant or Co-Borrower: 1 | An invalid Debt-to-Income Ratio was reported. Please review the information below and update your file accordingly. 1) If Ethnicity of Applicant or Borrower: 1 equals 4; and Race of Applicant or Borrower: 1 equals 7; and Sex of Applicant or Borrower: 1 equals 4 indicating the applicant or borrower is a non-natural person; and the Ethnicity of Co-Applicant or Co-Borrower: 1 equals 5; and Race of Co-Applicant or Co-Borrower: 1 equals 8; and Sex of Co-Applicant or Co-Borrower: 1 equals 5 indicating that there is no co-applicant or co-borrower, then Debt-to-Income Ratio must be NA or Exempt. 2) If Ethnicity of Applicant or Borrower: 1 equals 4; and Race of Applicant or Borrower: 1 equals 7; and Sex of Applicant or Borrower: 1 equals 4 indicating the applicant or borrower is a non-natural person; and the Ethnicity of Co-Applicant or Co-Borrower: 1 equals 4; and Race of Co-Applicant or Co-Borrower: 1 equals 7; and Sex of Co-Applicant or Co-Borrower: 1 equals 4 indicating that the co-applicant or co-borrower is also a non-natural person, then Debt-to-Income Ratio must be NA or Exempt. | |
Combined Loan-to-Value Ratio | Combined Loan-to-Value Ratio; Action Taken | An invalid Combined Loan-to-Value Ratio was reported. Please review the information below and update your file accordingly. 1) Combined Loan-to-Value Ratio must be a number greater than 0, Exempt, or NA, and cannot be left blank. 2) If Action Taken equals 4, 5, or 6, then Combined Loan-to-Value ratio must be NA or Exempt. | |
Loan Term | Loan Term; Reverse Mortgage | An invalid Loan Term was reported. Please review the information below and update your file accordingly. 1) Loan Term must be a whole number greater than zero, Exempt, or NA, and cannot be left blank. 2) If Reverse Mortgage equals 1, then Loan Term must be NA or Exempt. | |
Introductory Rate Period | Introductory Rate Period | An invalid Introductory Rate Period was reported. Please review the information below and update your file accordingly. 1) Introductory Rate Period must be a whole number greater than zero, Exempt, or NA, and cannot be left blank. | |
Non-Amortizing Features | Balloon Payment | An invalid Balloon Payment was reported. Please review the information below and update your file accordingly. 1) Balloon Payment must equal 1111, 1, or 2, and cannot be left blank. | |
Non-Amortizing Features | Interest-Only Payments | An invalid Interest Only Payments was reported. Please review the information below and update your file accordingly. 1) Interest Only Payments must equal 1111, 1, or 2, and cannot be left blank. | |
Non-Amortizing Features | Negative Amortization | An invalid Negative Amortization was reported. Please review the information below and update your file accordingly. 1) Negative Amortization must equal 1111, 1, or 2, and cannot be left blank. | |
Non-Amortizing Features | Other Non-amortizing Features | An invalid Other Non-amortizing Features was reported. Please review the information below and update your file accordingly. 1) Other Non-amortizing Features must equal 1111, 1, or 2, and cannot be left blank. | |
Property Value | Property Value; Action Taken | An invalid Property Value was reported. Please review the information below and update your file accordingly. 1) Property Value must be a number greater than 0, Exempt, or NA, and cannot be left blank. 2) If Action Taken equals 4 or 5, then Property Value must be NA or Exempt. | |
Manufactured Home Secured Property Type | Manufactured Home Secured Property Type; Multifamily Affordable Units; Construction Method | An invalid Manufactured Home Secured Property Type was reported. Please review the information below and update your file accordingly. 1) Manufactured Home Secured Property Type must equal 1111, 1, 2, or 3, and cannot be left blank. 2) If Multifamily Affordable Units is a number, then Manufactured Home Secured Property Type must equal 1111 or 3. 3) If Construction Method equals 1, then Manufactured Home Secured Property Type must equal 1111 or 3. | |
Manufactured Home Land Property Interest | Manufactured Home Land Property Interest; Multifamily Affordable Units; Construction Method | An invalid Manufactured Home Land Property Interest was reported. Please review the information below and update your file accordingly. 1) Manufactured Home Land Property Interest must equal 1111, 1, 2, 3, 4, or 5, and cannot be left blank. 2 If Multifamily Affordable Units is a number, then Manufactured Home Land Property Interest must equal 1111 or 5. 3) If Construction Method equals 1, then Manufactured Home Land Property Interest must equal 1111 or 5. | |
Total Units | Total Units | An invalid Total Units was reported. Please review the information below and update your file accordingly. 1) Total Units must be a whole number greater than 0, and cannot be left blank. | |
Multifamily Affordable Units | Multifamily Affordable Units; Total Units | An invalid Multifamily Affordable Units was reported. Please review the information below and update your file accordingly. 1) Multifamily Affordable Units must be a whole number, Exempt, or NA, and cannot be left blank. 2) If Total Units is less than 5, then Multifamily Affordable Units must be NA or Exempt. 3) If Total Units is greater than or equal to 5, then Multifamily Affordable Units must be less than or equal to Total Units, NA or Exempt. | |
Application Channel | Submission of Application; Action Taken | An invalid Application Channel data field was reported. Please review the information below and update your file accordingly. 1) Submission of Application must equal 1111, 1, 2, or 3, and cannot be left blank. 2) If Action Taken equals 6, then Submission of Application must equal 1111 or 3. 3) If Submission of Application equals 3, then Action Taken must equal 6. | |
Application Channel | Initially Payable to Your Institution; Action Taken | An invalid Application Channel data field was reported. Please review the information below and update your file accordingly. 1) Initially Payable to Your Institution must equal 1111, 1, 2, or 3, and cannot be left blank. 2) If Action Taken equals 6, then Initially Payable to Your Institution must equal 1111 or 3. 3) If Action Taken equals 1, then Initially Payable to Your Institution must equal 1111, 1, or 2. | |
Mortgage Loan Originator NMLSR Identifier | Mortgage Loan Originator NMLSR Identifier | An invalid NMLSR Identifier was reported. Please review the information below and update your file accordingly. 1) NMLSR Identifier must be a valid NMLSR ID in integer format, NA, or Exempt, and cannot be left blank. 2) NMLSR Identifier must not contain only the number zero (0) as a value. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5 | An invalid Automated Underwriting System data field was reported. Please review the information below and update your file accordingly. 1) Automated Underwriting System: 1 must equal 1111, 1, 2, 3, 4, 5, 6, or 7 and cannot be left blank. Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4 ; and Automated Underwriting System: 5 must equal 1, 2, 3, 4, 5, 7 or be left blank. 2) Automated Underwriting System Result: 1 must equal 1111, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, or 24 and cannot be left blank. Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4 ; and Automated Underwriting System Result: 5 must equal 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 19, 20, 21, 22, 23, 24 or be left blank. 3) The number of reported Automated Underwriting Systems must equal the number of reported Automated Underwriting System Results. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5 | An invalid Automated Underwriting System data field was reported. Please review the information below and update your file accordingly. 1) If Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; or Automated Underwriting System: 5 equals 5, then the corresponding Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4 ; or Automated Underwriting System Result: 5 must equal 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 19, 20, 21, 22, 23 or 24. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5 | An invalid Automated Underwriting System data field was reported. Please review the information below and update your file accordingly. 1) If Automated Underwriting System: 1 equals 6, then the corresponding Automated Underwriting System Result: 1 must equal 17; and the Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; and Automated Underwriting System Result: 5 must all be left blank. 2) If Automated Underwriting System Result: 1 equals 17, then the corresponding Automated Underwriting System: 1 must equal 6; and the Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; and Automated Underwriting System Result: 5 must all be left blank. | |
Automated Underwriting System | Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5 | An invalid Automated Underwriting System data field was reported. Please review the information below and update your file accordingly. 1) If Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; or Automated Underwriting System: 5 was left blank, then the corresponding reported Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4 ; or Automated Underwriting System Result: 5 must be left blank. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System: Conditional Free Form Text Field for Code 5 | An invalid Automated Underwriting System data field was reported. Please review the information below and update your file accordingly. 1) Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; or Automated Underwriting System: 5 was reported Code 5: Other. However, the Automated Underwriting System: Conditional Free Form Text Field for Code 5 was left blank; or 2) The Automated Underwriting System: Conditional Free Form Text Field for Code 5 was reported, but Code 5 was not reported in Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; or Automated Underwriting System: 5. | |
Automated Underwriting System | Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5; Automated Underwriting System Result: Conditional Free Form Text Field for Code 16 | An invalid Automated Underwriting System Result data field was reported. Please review the information below and update your file accordingly. 1) Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4 ; or Automated Underwriting System Result: 5 was reported Code 16: Other. However, the Automated Underwriting System Result: Conditional Free Form Text Field for Code 16 was left blank; or 2) The Automated Underwriting System Result: Conditional Free Form Text Field for Code 16 was reported, but Code 16 was not reported in Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; or Automated Underwriting System Result: 5 . | |
Automated Underwriting System | Action Taken; Automated Underwriting System: 1; Automated Underwriting System Result: 1 | An invalid Automated Underwriting System data field was reported. Please review the information below and update your file accordingly. 1) If Action Taken equals 6, then Automated Underwriting System: 1 must equal 1111 or 6. 2) If Action Taken equals 6, then Automated Underwriting System Result: 1 must equal 1111 or 17. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System Result: 1; Ethnicity of Applicant or Borrower: 1; Race of Applicant or Borrower: 1; Sex of Applicant or Borrower: 1; Ethnicity of Co-Applicant or Co-Borrower: 1; Race of Co-Applicant or Co-Borrower: 1; Sex of Co-Applicant or Co-Borrower: 1 | An invalid Automated Underwriting System data field was reported. Please review the information below and update your file accordingly. 1) If Ethnicity of Applicant or Borrower: 1 equals 4; and Race of Applicant or Borrower: 1 equals 7; and Sex of Applicant or Borrower: 1 equals 4 indicating the applicant is a non-natural person; and the Ethnicity of Co-Applicant or Co-Borrower: 1 equals 5; and Race of Co-Applicant or Co-Borrower: 1 equals 8; and Sex of Co-Applicant or Co-Borrower: 1 equals 5 indicating that there is no co-applicant or co-borrower, then Automated Underwriting System: 1 must equal 1111 or 6; and Automated Underwriting System Result: 1 must equal 1111 or 17. 2) If the Ethnicity of Applicant or Borrower: 1 equals 4; and Race of Applicant or Borrower: 1 equals 7; and Sex of Applicant or Borrower: 1 equals 4 indicating the applicant or borrower is a non-natural person; and Ethnicity of Co-Applicant or Co-Borrower: 1 equals 4; and Race of Co-Applicant or Co-Borrower: 1 equals 7; and Sex of Co-Applicant or Co-Borrower: 1 equals 4 indicating that the co-applicant or co-borrower is also a non-natural person, then Automated Underwriting System: 1 must equal 1111 or 6; and Automated Underwriting System Result: 1 must equal 1111 or 17. | |
Reverse Mortgage | Reverse Mortgage | An invalid Reverse Mortgage was reported. Please review the information below and update your file accordingly. 1) Reverse Mortgage must equal 1111, 1, or 2, and cannot be left blank. | |
Open-End Line of Credit | Open-End Line of Credit | An invalid Open-End Line of Credit was reported. Please review the information below and update your file accordingly. 1) Open-End Line of Credit must equal 1111, 1, or 2, and cannot be left blank. | |
Business or Commercial Purpose | Business or Commercial Purpose | An invalid Business or Commercial Purpose was reported. Please review the information below and update your file accordingly. 1) Business or Commercial Purpose must equal 1111, 1, or 2, and cannot be left blank. | |
Property Address | Street Address; City; Zip Code | An invalid Property Address was reported. Please review the information below and update your file accordingly. 1) If Street Address, City, or Zip Code is reported Exempt, then all three must be reported Exempt. | |
Credit Score | Credit Score of Applicant or Borrower; Credit Score of Co-Applicant or Co-Borrower; Applicant or Borrower, Name and Version of Credit Scoring Model; Applicant or Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8; Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model; Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 | An invalid Credit Score was reported. Please review the information below and update your file accordingly: If the Credit Score exemption election is taken, 1) Credit Score of Applicant or Borrower, Credit Score of Co-Applicant or Co-Borrower, Applicant or Borrower, Name and Version of Credit Scoring Model, and Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model must be reported 1111; and 2) Applicant or Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 and Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model: Conditional Free Form Text Field for Code 8 must be left blank. | |
Reason for Denial | Reason for Denial: 1; Reason for Denial: 2; Reason for Denial: 3; Reason for Denial: 4; Reason for Denial: Conditional Free Form Text Field for Code 9 | An invalid Reason for Denial was reported. Please review the information below and update your file accordingly: 1) If the Reason for Denial exemption election is taken, Reason for Denial: 1 must be reported 1111; and 2) Reason for Denial: 2, Reason for Denial: 3, Reason for Denial: 4, and Reason for Denial: Conditional Free Form Text Field for Code 9 must be left blank. | |
Total Loan Costs or Total Points and Fees | Total Loan Costs; Total Points and Fees | An invalid Total Loan Costs or Total Points and Fees was reported. Please review the information below and update your file accordingly: 1) If the Total Loan Costs or Total Points and Fees exemption election is taken, Total Loan Costs and Total Points and Fees must be reported Exempt. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System: Conditional Free Form Text Field for Code 5; Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5; Automated Underwriting System Result: Conditional Free Form Text Field for Code 16 | An invalid Automated Underwriting System was reported. Please review the information below and update your file accordingly: If the Automated Underwriting System exemption election is taken, 1) Automated Underwriting System: 1 and Automated Underwriting System Result: 1 must be reported 1111; and 2) Automated Underwriting System: 2, Automated Underwriting System: 3, Automated Underwriting System: 4, Automated Underwriting System: 5, Automated Underwriting System: Conditional Free Form Text Field for Code 5, Automated Underwriting System Result: 2, Automated Underwriting System Result: 3, Automated Underwriting System Result: 4, Automated Underwriting System Result: 5, and Automated Underwriting System Result: Conditional Free Form Text Field for Code 16 must be left blank. | |
Application Channel | Submission of Application; Initially Payable to Your Institution | An invalid Application Channel was reported. Please review the information below and update your file accordingly: 1) If the Application Channel exemption election is taken, Submission of Application and Initially Payable to Your Institution must be reported 1111. | |
Non-Amortizing Features | Balloon Payment; Interest-Only Payments; Negative Amortization; Other Non-amortizing Features | An invalid Non-Amortizing Features was reported. Please review the information below and update your file accordingly: 1) If the Non-Amortizing Features exemption election is taken, Balloon Payment, Interest-Only Payments, Negative Amortization and Other Non-amortizing Features must be reported 1111. | |
Property Location | County; State | An invalid Property Location was reported. Please review the information below and update your file accordingly: 1) The reported State and County are not a valid combination. If neither State nor County were reported NA, then the County must be located within the State. | |
Credit Score | Credit Score of Applicant or Borrower; Credit Score of Co-Applicant or Co-Borrower; Applicant or Borrower, Name and Version of Credit Scoring Model; Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model | An invalid Credit Score was reported. Please review the information below and update your file accordingly: 1) If Applicant or Borrower, Name and Version of Credit Scoring Model is 1, 2, 3, 4, 5, 6, 11, or 12 Credit Score of Applicant or Borrower should be 280 or above. 2) If Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model is 1, 2, 3, 4, 5, 6, or 11 or 12, Credit Score of Co-Applicant or Co-Borrower should be 280 or above. 3) If Applicant or Borrower, Name and Version of Credit Scoring Model is 13, 14, or 15, Credit Score of Applicant or Borrower must be 300 or above. 4) If Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model is 13, 14 or 15 Credit Score of Co-Applicant or Co-Borrower must be 300 or above | |
Age | Age of Applicant or Borrower; Age of Co-Applicant or Co-Borrower | An invalid Age was reported. Please review the information below and update your file accordingly: 1) If Age of Applicant or Borrower is not 8888, indicating Not Applicable, it must be the applicant or borrower’s age and cannot be 9999 or 1111. 2) If Age of Co-Applicant is not 8888, indicating Not Applicable, or 9999, indicating No Co-Applicant, it must be the co-applicant or co-borrower’s age and cannot be 1111. |
TABLE 7: QUALITY EDITS FOR LOAN/APPLICATION REGISTER
Table 7 | |||
---|---|---|---|
Edit ID | Data Point Name | Affected Data Fields | Edit Description |
ULI | ULI | Please verify the information below and update your file, if needed 1) A duplicate ULI or NULI was reported. | |
Application Date | Application Date; Action Taken Date | Please verify the information below and update your file, if needed. 1) Application Date occurs more than two years prior to Action Taken Date. | |
Property Address | Street Address; City; State; Zip Code | Please verify the information below and update your file, if needed. 1) Street Address was reported NA, but City, State, and Zip Code were provided. | |
Property Location | County; Census Tract | An invalid Census Tract was reported. Please review the information below and update your file accordingly. 1) The County has a population of greater than 30,000 according to the most recent decennial census and was not reported NA; however Census Tract was reported NA. | |
Type of Purchaser | Type of Purchaser; Loan Type | Please review the information below and update your file, if needed. 1) If Type of Purchaser equals 1 or 3, then Loan Type generally should equal 1. 2) If Type of Purchaser equals 2, then Loan Type generally should equal 2, 3, or 4. | |
Income | Income | Please review the information below and update your file, if needed. 1) If Income is a number, then it generally should be less than $10 million (entered as 10000) . | |
Loan Amount | Loan Amount; Lien Status | Please review the information below and update your file, if needed. 1) If Lien Status equals 2, then Loan Amount generally should be less than or equal to $250 thousand (entered as 250000) . | |
Action Taken | Action Taken; Action Taken Date; Application Date | Please review the information below and update your file, if needed. 1) If Action Taken equals 1, then the Action Taken Date generally should occur after the Application Date. | |
Type of Purchaser | Type of Purchaser; Rate Spread | Please review the information below and update your file, if needed. 1) If Type of Purchaser equals 1, 2, 3, or 4, then Rate Spread generally should be less than or equal to 10%, Exempt, or NA. | |
HOEPA Status | Action Taken; Lien Status; Rate Spread; HOEPA Status | Please review the information below and update your file, if needed. 1) If Action Taken equals 1, Lien Status equals 1, and Rate Spread is greater than 6.5%, then HOEPA Status generally should be 1. | |
HOEPA Status | Action Taken; Lien Status; Rate Spread; HOEPA Status | Please review the information below and update your file, if needed. 1) If Action Taken equals 1, Lien Status equals 2, and Rate Spread is greater than 8.5%, then HOEPA Status generally should be 1. | |
HOEPA Status | Type of Purchaser; HOEPA Status | Please review the information below and update your file, if needed. 1) If Type of Purchaser equals 1 or 3, then HOEPA Status generally should be 2 or 3. | |
Loan Purpose | Business or Commercial Purpose; Loan Purpose | Please review the information below and update your file, if needed. 1) If Business or Commercial Purpose equals 1, then Loan Purpose generally should equal 1, 2, 31, 32, or 5. | |
Age | Age of Applicant or Borrower; Age of Co-Applicant or Co-Borrower | Please review the information below and update your file, if needed. 1) The Age of Applicant or Borrower generally should be between 18 and 100 unless the Age of Applicant or Borrower is reported 8888 indicating NA. Your data indicates a number outside of this range. 2) The Age of Co-Applicant or Co-Borrower generally should be between 18 and 100 unless the Age of Co-Applicant or Co-Borrower is reported 8888 indicating NA or 9999 indicating no co-applicant or co-borrower. Your data indicates a number outside of this range. | |
Origination Charges | Origination Charges; Total Loan Costs; Total Points and Fees | Please review the information below and update your file, if needed. 1) If Total Loan Costs and Origination Charges are not reported NA or Exempt, and are both nonzero numbers, then Total Loan Costs generally should be greater than Origination Charges. 2) If Total Points and Fees and Origination Charges are not reported NA or Exempt, and are both nonzero numbers, then Total Points and Fees generally should be greater than Origination Charges. | |
Discount Points | Discount Points; Total Loan Costs; Total Points and Fees | Please review the information below and update your file, if needed. 1) If Total Loan Costs and Discount Points are not reported NA or Exempt, and are both nonzero numbers, then Total Loan Costs generally should be greater than Discount Points. 2) If Total Points and Fees and Discount Points are not reported NA or Exempt, and are both nonzero numbers, then Total Points and Fees generally should be greater than Discount Points. | |
Combined Loan-to-Value Ratio | Loan Type, Combined Loan-to-Value Ratio, Loan Amount, and Property Value | Please review the information below and update your file, if needed. 1) If Loan Type equals 1 and Combined Loan-to-Value Ratio and Property Value are not reported NA or Exempt, then the Combined Loan-to Value Ratio generally should be greater than or equal to the Loan-to-Value Ratio (calculated as Loan Amount divided by the Property Value ). | |
Manufactured Home Secured Property Type | Construction Method; Manufactured Home Secured Property Type | Please review the information below and update your file, if needed. 1) If Construction Method equals 2, then Manufactured Home Secured Property Type generally should not be 3. | |
Manufactured Home Land Property Interest | Construction Method; Manufactured Home Land Property Interest | Please review the information below and update your file, if needed. 1) If Construction Method equals 2, then Manufactured Home Land Property Interest generally should not be 5. | |
NMLSR ID | Business or Commercial Purpose; NMLSR ID | Please review the information below and update your file, if needed. 1) If Business or Commercial Purpose equals 2, then NMLSR ID generally should not be NA. | |
NMLSR ID | NMLSR ID | Please review the information below and update your file, if needed. 1) The NMLSR ID should be alphanumeric up to 12 characters. Your data indicates a value outside of this range. | |
Age of Applicant or Borrower | Reverse Mortgage; Age of Applicant or Borrower | Please review the information below and update your file, if needed. 1) If Reverse Mortgage equals 1, then the Age of Applicant or Borrower generally should be greater than or equal to 62. Your data indicates a number outside this range. | |
Loan Amount | Loan Amount; Total Units; Income | Please review the information below and update your file, if needed. 1) If Total Units is less than or equal to 4 and Income is less than or equal to $200,000 (reported as 200) , then Loan Amount generally should be less than $2,000,000 (reported as 2000000) . | |
Loan Amount | Loan Type; Total Units; Loan Amount | Please review the information below and update your file, if needed. 1) If Loan Type equals 2 and Total Units equals 1, then Loan Amount generally should be less than or equal to $637,000 (reported as 637000) . | |
Loan Amount | Loan Type; Total Units; Loan Amount | Please review the information below and update your file, if needed. 1) If Loan Type equals 3 and Total Units is less than or equal to 4, then Loan Amount generally should be less than or equal to $1,050,000 (reported as 1050000) . | |
Loan Amount | Type of Purchaser; Total Units; Loan Amount | Please review the information below and update your file, if needed. 1) If Type of Purchaser equals 1, 2, 3, or 4 and Total Units is less than or equal to 4, then Loan Amount generally should be less than or equal to $1,225,000 (reported as 1225000) . | |
Loan Amount | Total Units; Loan Amount | Please review the information below and update your file, if needed. 1) If Total Units is greater than or equal to 5, then Loan Amount generally should be between $100,000 (reported as 100000) and $10,000,000 (reported as 10000000) . | |
Loan Amount | Loan Purpose; Loan Amount; Total Units | Please review the information below and update your file, if needed. 1) If Loan Purpose equals 1 and Total Units is less than or equal to 4, then Loan Amount generally should be greater than $10,000 (reported as 10000) . | |
Income | Action Taken; Total Units; Loan Purpose; Income | Please review the information below and update your file, if needed. 1) If Action Taken equals 1, 2, 3, 4, 5, 7, or 8; Total Units is less than or equal to 4; and Loan Purpose equals 1, 2, or 4, then Income generally should not be NA. | |
HOEPA Status | Total Units; HOEPA Status | Please review the information below and update your file, if needed. 1) If Total Units is greater than or equal to 5, then HOEPA Status generally should equal 3. | |
Total Units | Loan Type; Total Units | Please review the information below and update your file, if needed. 1) If Loan Type equals 2, 3, or 4, then Total Units generally should be less than or equal to 4. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5 | Please review the information below and update your file, if needed 1) If Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; or Automated Underwriting System: 5 equals 3, then the corresponding Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; or Automated Underwriting System Result: 5 should equal 1, 2, 3, 4, 8, 13, 18, 19 or 16. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5 | Please review the information below and update your file, if needed. 1) If Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; or Automated Underwriting System: 5 equals 4, then the corresponding Automated Underwriting System Result: 1 ; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; or Automated Underwriting System Result: 5 should equal 3, 4, 10, 15, 18, 19, 20, 21, 22, 23, 24 or 16. | |
Credit Score | Credit Score of Applicant or Borrower; Applicant or Borrower, Name and Version of Credit Scoring Model; Credit Score of Co-Applicant or Co-Borrower; Co-Applicant or Co-Borrower, Name and Version of Credit Scoring Model | Please review the information below and update your file, if needed. 1) If Credit Score of Applicant or Borrower equals 7777 indicating a credit score that is not a number, then Applicant or Borrower, Name and Version of Credit Scoring Model should equal 7 or 8. 2) If Credit Score of Co-Applicant or Co-Borrower equals 7777 indicating a credit score that is not a number, then Co- Applicant or Co-Borrower, Name and Version of Credit Scoring Model should equal 7 or 8. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5 | Please review the information below and update your file, if needed. 1) If Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; or A utomated Underwriting System: 5 equals 1, then the corresponding Automated Underwriting System Result: 1 ; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; or Automated Underwriting System Result: 5 should equal 1, 2, 3, 4, 5, 6, 7, 15, or 16. | |
Automated Underwriting System | Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; Automated Underwriting System: 5; Automated Underwriting System Result: 1; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3; Automated Underwriting System Result: 4; Automated Underwriting System Result: 5 | Please review the information below and update your file, if needed. 1) If Automated Underwriting System: 1; Automated Underwriting System: 2; Automated Underwriting System: 3; Automated Underwriting System: 4; or Automated Underwriting System: 5 equals 2, then the corresponding Automated Underwriting System Result: 1 ; Automated Underwriting System Result: 2; Automated Underwriting System Result: 3 ; Automated Underwriting System Result: 4; or Automated Underwriting System Result: 5 should equal 8, 9, 10, 11, 12, 13, or 16. | |
Loan Amount | Loan Amount | Please review the information below and update your file, if needed. 1) Loan Amount should generally be greater than or equal to $500 (reported 500) . 2) If Loan Purpose equals 1, then Loan Amount should generally be greater than or equal to $1,000 (reported 1000) . | |
ULI | Action Taken; Universal Loan Identifier (ULI) | Please review the information below and update your file, if needed. 1) If Action Taken equals 1, 2, 3, 4, 5, 7, or 8, the first 20 characters of the ULI should match the reported LEI. | |
Credit Score | Credit Score of Applicant or Borrower; Credit Score of Co-Applicant or Co-Borrower | Please review the information below and update your file, if needed. 1) If Credit Score of Applicant or Borrower does not equal 7777, 8888, or 1111, Credit Score should generally be between 300 and 900. 2) If Credit Score of Co-Applicant or Co-Borrower does not equal 7777, 8888, 9999, or 1111, Credit Score should generally be between 300 and 900. | |
Interest Rate | Interest Rate | Please review the information below and update your file, if needed. 1) The Interest Rate reported is greater than 0 but less than 0.5, which may indicate a misplaced decimal point. 2) The Interest Rate reported is greater than 20, which may indicate a misplaced decimal point. | |
Combined Loan-to-Value Ratio | Combined Loan-to-Value Ratio | Please review the information below and update your file, if needed. 1) The CLTV reported is greater than 0 but less than 1, which may indicate a misplaced decimal point. | |
Debt-to-Income Ratio | Debt-to-Income Ratio | Please review the information below and update your file, if needed. 1) The DTI reported is greater than 0 but less than 1, which may indicate a misplaced decimal point. | |
Combined Loan-to-Value Ratio | Combined Loan-to-Value Ratio; Action Taken | Please review the information below and update your file, if needed. 1) If Action Taken equals 1, 2, or 8, and the value for CLTV is not NA or Exempt, the CLTV should generally be between 0 and 250. 2) If Action Taken equals 3, 4, 5, 6, or 7, and the value for CLTV is not NA or Exempt, the CLTV should generally be between 0 and 1,000. | |
Debt-to-Income Ratio | Debt-to-Income Ratio; Income; Action Taken | Please review the information below and update your file, if needed. 1) If Income is greater than $5,000 (reported as 5) , Action Taken equals 1, 2, or 8, and the value for DTI is not NA or Exempt, the DTI should generally be between 0 and 80. | |
Multifamily Affordable Units | Total Units; Multifamily Affordable Units | Please review the information below and update your file, if needed. 1) If Total Units is greater than or equal to 5 and the record relates to a multifamily property, then Multifamily Affordable Units should generally be 0 or an integer. | |
Any data point eligible for an alphanumeric exemption code | Any data field eligible for an alphanumeric exemption code | Please review the information below and update your file, if needed. The value 1111 was entered in a field that accepts only Exempt as the exemption code, which may indicate an incorrect exemption code is being used. | |
Any data point that accepts a numeric data field type that is not eligible for an exemption code | Any data field that accepts a numeric data field type that is not eligible for an exemption code | Please review the information below and update your file, if needed. The value 1111 was entered in a field that does not accept 1111 as an exemption code, which may indicate that an incorrect exemption code is being used. | |
Loan Term | Loan Term | Please review the information below and update your file, if needed. 1) If Loan Term is not NA or Exempt, the Loan Term should generally be 600 or less. | |
Any data point that accepts a “Not Applicable” or “No Co-Applicant” value | Any data point that accepts a “Not Applicable” or “No Co-Applicant” value | Please review the information below and update your file, if needed. 1) The values 888 or 88888 were entered in a field that accepts 8888 or NA as a value, which may indicate that an incorrect value is being used. 2) The values 999 or 99999 were entered in a field that accepts 9999 or NA as a value, which may indicate that an incorrect value is being used. | |
Property Location | Street Address | Please review the information below and update your file, if needed. 1) The Street Address reported is longer than 100 characters, which may indicate that more than one address was reported. 2) The reported Street Address includes the values: “;”, “&”, or the word “and“, which may indicate that more than one address was reported. 3) The reported Street Address includes the values: ?, !, *, %, ^, @, [, ], {, } ,<,>,_, +, = or the word “tbd”, which may indicate that an invalid address was reported. 4) The reported Street Address contains either only numbers or only letters, which may indicate that an invalid Street Address was reported. Street Address should generally be alphanumeric, unless the reported value is "Exempt" or "NA". |
TABLE 8: MACRO QUALITY EDITS FOR LOAN/APPLICATION REGISTER
Table 8 | |||
---|---|---|---|
Edit ID | Data Point Name | Affected Data Fields | Edit Description |
Action Taken | Action Taken; Loan Purpose | Please review the information below and update your file, if needed. If more than 25 loans reported Action Taken equals 1 and Loan Purpose equals 1, then the number of these loans should be less than or equal to 95% of the loans reported with Loan Purpose equals 1. Your data indicates a percentage outside of this range. | |
Action Taken | Action Taken; Total Number of Entries Contained in Submission | Please review the information below and update your file, if needed. No more than 15% of the loans in the file should report Action Taken equals 2. Your data indicates a percentage outside of this range. | |
Action Taken | Action Taken; Total Number of Entries Contained in Submission | Please review the information below and update your file, if needed. No more than 30% of the loans in the file should report Action Taken equals 4. Your data indicates a percentage outside of this range. | |
Action Taken | Action Taken; Total Number of Entries Contained in Submission | Please review the information below and update your file, if needed. No more than 15% of the loans in the file should report Action Taken equals 5. Your data indicates a percentage outside of this range. | |
Action Taken | Action Taken | Please review the information below and update your file, if needed. The number of loans in the file that reported Action Taken equals 1 should be greater than or equal to 20% of the total number of loans that reported Action Taken 1, 2, 3, 4, 5, or 6. Your data indicates a percentage outside of this range. | |
Action Taken | Action Taken; Preapproval | Please review the information below and update your file, if needed. If more than 1000 loans were reported with Preapproval equals 1, then there should be at least 1 loan reported with Action Taken equals 7. Your data indicates a number outside of this range. | |
Income | Income; Total Number of Entries Contained in Submission | Please review the information below and update your file, if needed. No more than 20% of the loans in the file should report Income less than $10 thousand (entered as 10) . Your data indicates a percentage outside of this range. | |
Any data point eligible for an exemption code | Any field eligible for an exemption code | Your file indicates that at least one exemption code was used. Please verify that your institution is eligible for a partial exemption pursuant to the 2018 HMDA Rule. |
TABLE 9: MACRO QUALITY EDITS FOR TRANSMITTAL SHEET AND LOAN/APPLICATION REGISTER
Table 9 | |||
---|---|---|---|
Edit ID | Data Field | Affected Data Fields | Edit Description |
Federal Agency | Federal Agency; Any field eligible for exemption code. | Please review the information below and update your file, if needed. If Federal Agency equals 7, indicating a non-depository institution, exemption codes should not be used in the Loan/Application Register. Your data indicates that at least one exemption code was used. |
6. Additional information
6.1 Frequently Asked Questions
The Frequently Asked Questions are available in the Self Service Knowledge Portal at https://ffiec.cfpb.gov.
6.2 HMDA Help
Technical questions about reporting HMDA data collected in or after 2017 should be directed to hmdahelp@cfpb.gov.
Technical questions about reporting HMDA data collected in or before 2016 should be directed to hmdahelp@frb.gov.
Paperwork Reduction Act
According to the Paperwork Reduction Act of 1995, an agency may not conduct or sponsor, and, not withstanding any other provision of law, a person is not required to respond to a collection of information unless it displays a valid OMB control number. The OMB control number for this collection is 3170-0008. The time required to complete this information collection is estimated to average between 9,000 hours and 161 hours per response depending on the size of the institution, per response. The obligation to respond to this collection of information is mandatory per the Home Mortgage Disclosure Act 12 U.S.C. 2801–2810, as implemented by Consumer Financial Protection Bureau’s Regulation C, 12 CFR part 1003. Comments regarding this collection of information, including the estimated response time, suggestions for improving the usefulness of the information, or suggestions for reducing the burden to respond to this collection should be submitted to the Bureau at the Consumer Financial Protection Bureau (Attention: PRA Office), 1700 G Street NW, Washington, DC 20552, or by email to PRA@cfpb.gov. The other agencies collecting information under this regulation maintain OMB Control numbers for their collections as follows: Office of the Comptroller of the Currency (1557-0159), the Federal Deposit Insurance Corporation (3064-0046), the Federal Reserve System (7100-0247), the Department of Housing and Urban Development (HUD) (2502-0529), the National Credit Union Administration (3133-0166).
Footnotes
-
The HMDA agencies are the member agencies of the Federal Financial Institutions Examination Council (FFIEC)—the Consumer Financial Protection Bureau (CFPB), the Office of the Comptroller of the Currency (OCC), the Federal Deposit Insurance Corporation (FDIC), the Board of Governors of the Federal Reserve System (Board), and the National Credit Union Administration (NCUA), and the Department of Housing and Urban Development (HUD). ↩